Rep Power: 0

Refer to the following thread: http://www.2k1civic.com/forum/messag...threadid=35164

 
Rep Power: 0

Thanks Mike, that should do the job.

thanks, again Tom

 
Rep Power: 0

strutwizard

Please see my reply in the other thread

 
Rep Power: 0

WHOA!! Nice...maybe there's hope for our cars yet[IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 0

Won't these things act like coilovers since you have an adjustable perch that the springs sit on?

 
Rep Power: 0

Will the ride be bouncy?

 
Rep Power: 0

Will it ride better than with the Konis?

 
Rep Power: 0

I had "shorty" dampers and springs on my old Jetta: Eibach springs and Spax dampers...the ride was actually better than stock: no body lean, no bouncyness, just firm and controlled

I'd venture to say, w/o having tried them of course, that these are probably the best solution yet for our cars...especially since 7th gen civics are lighter than most similar size cars.

 
Rep Power: 0

so how do we get them who do we email / talk to?

i wanna see the warrantee and all that

droping my car is the next task so i'm saving up as we speak.....hook me up with some more info on those

 
Rep Power: 0

HeRbaLuS, you should check out the thread link in the very first post...Strutwizard answers a lot of questions and explains the merits of the shorty struts vs. stock ones w/ lowering springs

 
Rep Power: 328

I think I got in a little late on this. Is this a new adjustable from "strutwizard" I guess? Will these be compatible with ground controls?

 
Rep Power: 0

Yes, THis is a new shortened ride height adjustable coilover that uses most standard lowering springs.

Slip on sleeve kits are not required with this system.

 
Rep Power: 0

<< Won't these things act like coilovers since you have an adjustable perch that the springs sit on? >>




Yes, they do act just like true coilovers not the slip on sleeve type.

 
Rep Power: 0

hmm so how low can u go without blowing them??

 
Rep Power: 0

<< Will the ride be bouncy? >>



Ride quality is one of the main reason that I design shortened ride height adjustable struts because lowered cars don't have to ride like "Tanks"

Lower center of gravity and increase spring rate and up-graded valving equate to smooth ride and greatly improved handling.

 
Rep Power: 0

<< Will it ride better than with the Konis? >>



From the members it sound like the koni's are bottom out, the Bec-tech's are not.

 
Rep Power: 0

Strut Wizard. Where are you from?

 
Rep Power: 0

<< so how do we get them who do we email / talk to?

i wanna see the warrantee and all that

droping my car is the next task so i'm saving up as we speak.....hook me up with some more info on those >>




Here is the email address.

tobuybectecs@cs.com

 
Rep Power: 0

<< Strut Wizard. Where are you from? >>



Victorville, Ca

 
Rep Power: 0

Companies based out of Toronto, Canada though?

 
Rep Power: 0

<< hmm so how low can u go without blowing them?? >>



The tires will tucken under the fender before you can think about blowing out the strut. I have been using this type of strut technology for over 12 years.

The strut works like the factory setup, bottom out is not part of the design.

 
Rep Power: 0

damn i never hear of this type of suspension before...hmmm

sounds like such a good invention......if these are as good as it seems you are gonna be a happy man in a couple of months.

 
Rep Power: 328

<<

<< Strut Wizard. Where are you from? >>



Victorville, Ca >>



Hey I'm from vegas. Do you have any plans on coming up here at all? If you do I'd like to meet with you and take a look at your product...

 
Rep Power: 0

Wait...so if we get these, do we have to get lowering springs as well or could the stock ones be used?

 
Rep Power: 0

Will they work with the ebach springs that come with the ground control?

 
Rep Power: 0

<< Wait...so if we get these, do we have to get lowering springs as well or could the stock ones be used? >>



If you want to lower the car only to lower and not change the handling very much than you can use the stock springs. Using lowering springs will give you more of a drop and improve the handling much better than using the stock springs.

 
Rep Power: 0

<< Will they work with the ebach springs that come with the ground control? >>



Sorry but I designed the strut to work with full diameter springs like the car was designed to have on it.

 
Rep Power: 0

<< Companies based out of Toronto, Canada though? >>



What do you mean by company based in Toronto

 
Rep Power: 0

<<

<< Companies based out of Toronto, Canada though? >>



What do you mean by company based in Toronto >>



Yes, they will fit the 2001 civic direct bolt in.

thanks


I make them, I designed them and manufacture them in Ontario,Ca

Company is Bec-Tech Design



My Bad.. Ontario Calif?

 
Rep Power: 0

is this the same tom w/the bad rep on Purehonda and hondasociety?