Rep Power: 0

Well im replacing my fake tiens with the real s techs after noticing severe sag. While decompressing the springs the first time i ****ed up and all my ***** shot loose , now theres dirt,sand and all kinds of crap mixed with all the bearings and grease. Since im replacing the springs and taking all this crap apart again where can I buy new ball bearings and what kind of grease do I use to replace the old stuff.

Thx In advance
_prida

 
Rep Power: 277

Lol this happened to me too.. I just picked them all up, cleaned em off and put them back w/o a prob

 
Rep Power: 0

I would just wipe em off, but i've been riding on it for awhile like this, and im pretty sure I damaged a few if not all the bearings ^^

 
Rep Power: 412

silicone grease is fine.

 
Rep Power: 0

thx alot

 
Rep Power: 241

i think all my ball bearings fell out somewhere when i went really fast on a speedbump (accident) and i been driving around w/o it. is this bad. and one side of the front. the black round thing that holds the bearings is not staying up top anymore. its sitting on the springs. is that bad?

 
Rep Power: 290

if everything was installed and tightened properly, that should not have happened.

 
Rep Power: 241

well once i replaced my current coilover sleeves with tein ss. would i need the bearings and the thing that holds the bearings

 
Rep Power: 290

you could purchase pillow ball mounts with the new suspension, then no, you wouldn't need the original ones, as i understand it.

 
Rep Power: 241

oh alright cool