pics of carbing bars installed !!
Thread Starter
my vtec brings all the girls to the yard
iTrader: (2)
Joined: Sep 2005
Posts: 1,299
Likes: 0
From: DFW
Rep Power: 263 
pics of carbing bars installed !!
okay so about 2 weeks ago i just realized that carbing makes bars for the rsx and ep3. of course i'm gonna think hmmmm do they fit our cars. well i found some pics of members on clubrsx that had them installed. so check it out
here's the rear strut bar
the rear tie bar
and the 6pt subframe bar
a newer pic with many other bars ...
i found the rear tie bar for only 70 bucks so i'm gonna order it later this week when i get my check. also here's the thread i found the pics in full of info on the bars if your curious
http://forums.clubrsx.com/showthread...hlight=carbing
here's the rear strut bar
the rear tie bar
and the 6pt subframe bar
a newer pic with many other bars ...
i found the rear tie bar for only 70 bucks so i'm gonna order it later this week when i get my check. also here's the thread i found the pics in full of info on the bars if your curious
http://forums.clubrsx.com/showthread...hlight=carbing
Last edited by mrDFWmechanic; Nov 21, 2005 at 08:01 PM.
Thread Starter
my vtec brings all the girls to the yard
iTrader: (2)
Joined: Sep 2005
Posts: 1,299
Likes: 0
From: DFW
Rep Power: 263 well a good majority of tie bars for the rsx works on our car and for 70 bucks i'm gonna take the chance, in a week i will know for sure. and about the subframe it hangs really low i read about 3/4 lower than neuspeed xbrace. so if your car is super slammed then the carbing subframe bar isn't a good choice
Joined: Aug 2001
Posts: 10,857
Likes: 0
From: Gaithersburg, MD
Rep Power: 412 
Rears will fit, the underbrace may or may not depending on the subframe. I would print out that pic and crawl under your car to see if it looks the same. I know some of the points will match up but maybe not all.
Thread Starter
my vtec brings all the girls to the yard
iTrader: (2)
Joined: Sep 2005
Posts: 1,299
Likes: 0
From: DFW
Rep Power: 263 yea i was lookin at that but it hangs really low and ephatch members are complaining about how their scraping their bar over everything plus i'm thinkin that the 2 parts that connect around the cat wont fit. so i'm gonna end up sticking with my x brace. in the next few days i'm gonna order the tie bar and put it on my car and for 70 bucks thats a steal.
Thread Starter
my vtec brings all the girls to the yard
iTrader: (2)
Joined: Sep 2005
Posts: 1,299
Likes: 0
From: DFW
Rep Power: 263 i had a buddy that bought all the spoon bars for his rsx and man that thing handled insane. so far i've got a x brace with greddy strut bar and the DC5 22m rear sway im hopin this tie bar will finish my suspension setup
Registered!!
iTrader: (4)
Joined: Apr 2004
Posts: 831
Likes: 0
From: Montreal, Qc, Canada
Rep Power: 0
Originally Posted by sweeteli99
dc5 has a different subframe, i doubt it'd bolt up.
Thread Starter
my vtec brings all the girls to the yard
iTrader: (2)
Joined: Sep 2005
Posts: 1,299
Likes: 0
From: DFW
Rep Power: 263 okay here's the update the rear tie bar is on the way and it only cost me 81.25 shipped not a bad deal. i should get it by sat and i'll post pics of the install.
Thread Starter
my vtec brings all the girls to the yard
iTrader: (2)
Joined: Sep 2005
Posts: 1,299
Likes: 0
From: DFW
Rep Power: 263 i got an email a few days ago from optauto.com and the rear tie bar is on back order just my freakin luck so i have no clue when i'm gonna get it now
Originally Posted by mrDFWmechanic
and the 6pt subframe bar
Thread Starter
my vtec brings all the girls to the yard
iTrader: (2)
Joined: Sep 2005
Posts: 1,299
Likes: 0
From: DFW
Rep Power: 263 good to hear that will fit also, im gonna stick with my xbrace because the carbing bar hangs way too low and i'd be paranoid of catching it on something.
