Rep Power: 0

Well i know im going to get a bunch of crap for this post but all i want to know is what exactly do i need to install Tein Super Street coiloverson my 02 civic... Some people say you need an upper mount from an 01 civic... some say you dont. And what is included with this upper mount (all the grommets or just a mount or what?)

What the hell is the real story here... I'd like to have all the info before i spend 900 or more dollars on a suspension thats going to **** me over during the installation process.

thanks for any info...

 
Rep Power: 403

ibtl...haha


i believe its the upper mount, im not sure, but i have a 01, and yes, almost everyone that has installed it needed a 01 upper mount because of the massive squeeking or something, i forgot

 
Rep Power: 0

you needed these 01 upper mounts....

 
Rep Power: 0

You do need the 01 upper mounts. I am about to get my Tein SS's myself. I am gonna search for the part number a little later.

The squeaking some people experience is from not cutting the dust boot low enough. So make sure you cut yours low enough.

 
Rep Power: 343

hell yeah....some people that are going to buy TEIN SS like me....whew now i dont feel bad...i'm going to order mine next week...so if yall could get me the part number for the upper mount i will try to post after i install them....

 
Rep Power: 0

search, there's like a part list out there.

 
Rep Power: 343

you know that search **** never works....you type in TEIN and you get some **** like underglow lites some dumb **** like that...you know its true.

 
Rep Power: 0

I'll get the part numbers figured out here in a sec......

 
Rep Power: 0

On the 2002 our R front and L front shock absorber mounts are part number 465586 and 465628 respectivly... On the 2001 they are part numbers 369033 and 369034 respectivly... ( they are figure 10 and 11)
From the Honda parts book it says they're about $23 each...

Let me try to find the rear ones...

 
Rep Power: 0

i found out later for you guyz.....

 
Rep Power: 0

These are the parts you will need for tein ss/basics. Part # and prices too

Parts you need
Front:
------
369032 Part 9 (BEARING, FR. SHOCK ABSORBER MOUNT) $13.98 X 2
369034 Part 10 (MOUNT, R. FR.) $23.45 X 1
369034 Part 11 (MOUNT, L. FR.) $23.45 X 1



For some reason the info I found differs from the info that Xerox posted, who is right??

 
Rep Power: 0

http://www.hondaautomotiveparts.com

This should get you to the page then go into the parts store and look for front shock absorber and rear shock absorber...

 
Rep Power: 0

So who is right??

Xerox or me (i got my info from another post, not personal knowledge)

 
Rep Power: 0

Why would you need anything for the rear???

 
Rep Power: 0

haha...I think we're both right, part number 369033 is the right side mount and part number 369034 is the left i think....

 
Rep Power: 0

i wasn't sure if the rear was a problem or not... i couldnt remember what was said about it

 
Rep Power: 0

well at least we agree on this

369032 Part 9 (BEARING, FR. SHOCK ABSORBER MOUNT) $13.98 X 2


lol,

 
Rep Power: 0

No the rear is cool, just the front.

 
Rep Power: 0

i guess you didn't search HARD enough. I searched on this topic before, read every single post and got all the answer i needed. If you want answer, learn how to search and read !

 
Rep Power: 343

well i got my answer without searching! there are some nice people around that can help!........with those part numbers will they work with the 03....i have a 03 ex and was wondering if i needed those parts as well????

 
Rep Power: 0

Foe Tein SS – what 2001 stock parts to order:

Front:
------
369032 Part 9 (BEARING, FR. SHOCK ABSORBER MOUNT) $13.98 X 2
369034 Part 10 (MOUNT, R. FR.) $23.45 X 1
369034 Part 11 (MOUNT, L. FR.) $23.45 X 1

Rear:
-----
36557 Part 1 (WASHER, SHOCK ABSORBER MOUNTING) $0.27 X 2
22692 Part 2 (COLLAR, SHOCK ABSORBER MOUNT (DUFFY STEEL PARTS) ) $0.45 X 2
369095 Part 8 (RUBBER, SHOCK ABSORBER MOUNTING) $4.74 X 2
369097 Part 9 (BASE, RR. SHOCK ABSORBER MOUNTING) $18.62 X 2
369099 Part 10 (AL, SHOCK ABSORBER MOUNTING) $3.80 X 2
369101 Part 11 (PLATE, SHOCK ABSORBER MOUNT) $1.79 X 2
369103 Part 12 (RUBBER, RR. SPRING MOUNTING) $9.71 X 2
369105 Part 13 (COVER, RR. DUST) $7.22 X 2
369109 Part 15 (PLATE, BUMP STOP) $2.15 X 2

Someone posted this a while back and I copied it. Not sure if its all correct. Should have copied diagram as well.

 
Rep Power: 343

So do you actually need those parts for the rear coilover......

 
Rep Power: 343

i have a 03 ex and wondered do i need those extra parts for an 03. i know a lot of people are puttin them on 02 but is there any diffrence when it comes to the 03 suspension?

 
Rep Power: 0

For as long as I can remember the fronts have been the only thing where you needed extra stuff for.

The rears were fine.

There are peeps on this site that haven't bought anything and used the stock front uppermounts and haven't had a problem. It's just not recommened by TEIN.

 
Rep Power: 343

Ok coo.... ViNRoCk8 do you also have the TEIN SS....?/????

 
Rep Power: 303

dont worry just buy it.......and look at ur stock set up....look at the SS

take the stuff that the SS doesnt have from the stock over.....and install it

easy as that

 
Rep Power: 0

no, like it says in my sig, it is my next mod. So I have been doing alot of research.

 
Rep Power: 0

and for 01s u dont need anything correct

 
Rep Power: 0

so do you need mounts for the rear or not?

 
Rep Power: 0

Yeah i would also like to know if you would need anything for the rear on the basic or SS. I know the front just needs the bearing and mounts. But, does the rear need the mounts and bearings or does Tein include that with the basic or SS?