power steering o ring location
power steering o ring location
I deff know I need to change my power steering o ring but I don't know the location of the inlets or outlets if anybody can point me in the right direction would be a great help ..ohh yea my fluid is foaming and I get an annoying whining noise
(((
((( If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 517 










Re: power steering o ring location
I deff know I need to change my power steering o ring but
The pump inlet fitting is what usually needs the O ring replaced. Follow the short hose from reservoir to pump.
Re: power steering o ring location
because its foaming and leaks from the top so air is coming from somewhere I'm a 100% its that when I follow short hose where is the bolt
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 517 










Re: power steering o ring location
I'm thinking you haven't looked at your pump to find the inlet fitting and bolt in question
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 517 










Re: power steering o ring location
That hose leads to the pump inlet fitting, there is only one bolt holding that fitting to the pump
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 517 










Re: power steering o ring location
I was trying to find a google pic that has the bolt actually labeled but nooooooo.
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 517 










Re: power steering o ring location
Duhh its right there infront of me ok i got this !!




