2001 civic eng replace need help
Thread Starter
Registered!!
Joined: Oct 2010
Posts: 1
Likes: 0
Rep Power: 0 
2001 civic eng replace need help
Hey all
I have a 2001 civic with an eng that took a poop. Well I have new used eng from a 2005 of the same size and all but am finding that my original does not have an EGR valve and the new one does.
I am wondering if I can just swap the water passage from my old eng to the new thus deleting the EGR.
The only thing I have noticed to hinder that is blowing compressed air in the rear passage of the new head leads to air coming out of the intake manifold and on the old eng I just have a blocked port.
Any helps or tips would be great.
Larry
I have a 2001 civic with an eng that took a poop. Well I have new used eng from a 2005 of the same size and all but am finding that my original does not have an EGR valve and the new one does.
I am wondering if I can just swap the water passage from my old eng to the new thus deleting the EGR.
The only thing I have noticed to hinder that is blowing compressed air in the rear passage of the new head leads to air coming out of the intake manifold and on the old eng I just have a blocked port.
Any helps or tips would be great.
Larry
Registered!!
Joined: Aug 2010
Posts: 3
Likes: 0
Rep Power: 0 Re: 2001 civic eng replace need help
Hey all
I have a 2001 civic with an eng that took a poop. Well I have new used eng from a 2005 of the same size and all but am finding that my original does not have an EGR valve and the new one does.
I am wondering if I can just swap the water passage from my old eng to the new thus deleting the EGR.
The only thing I have noticed to hinder that is blowing compressed air in the rear passage of the new head leads to air coming out of the intake manifold and on the old eng I just have a blocked port.
Any helps or tips would be great.
Larry
I have a 2001 civic with an eng that took a poop. Well I have new used eng from a 2005 of the same size and all but am finding that my original does not have an EGR valve and the new one does.
I am wondering if I can just swap the water passage from my old eng to the new thus deleting the EGR.
The only thing I have noticed to hinder that is blowing compressed air in the rear passage of the new head leads to air coming out of the intake manifold and on the old eng I just have a blocked port.
Any helps or tips would be great.
Larry
well from what i searchd is that most models 01 is a d17a1 which wouldnt contain the EGR valve. nt really sure..but with my d17a2 ther is a tube that is on ur head of the ntake manifold which aslo contains a sensor. it should be able to plug if u have hte filter box frm the 02+ models.also is it a vtec or non?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
mattdoc
Mechanical Problems/Vehicle Issues and Fix-it Forum
9
Mar 14, 2017 12:10 PM
CapYoda
General Automotive Discussion
9
Nov 11, 2001 05:17 PM
Lightman
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
Nov 10, 2001 06:44 PM
