Rep Power: 0

I am in the process of rebuilding a D series motor for my wife. Picked up a 94 LX dirt cheap with a blown head gasket. Has 184k on it so while pulling the head i decided to go ahead and tear it apart to see what else it needed. Main and Rod bearings are shot, but rods and cylinder walls and crank all seem to be fine. I am planning on rebuilding it from top to bottom with as many new components as possible. Was curious if anyone could give me a average price to have a machine shop grind/polish my crank along with install it along with new bearings and pistons into the block. As far as the rest of the installation i will do myself i just don't have access to the equipment needed to machine the cylinders/crank etc. Money is tight and rather than start with a used motor which i feel is questionable, i decided to spend the money to rebuild it and have a good reliable "new" engine. Was into honda's years ago but have never rebuilt an engine any help/info would be appreciated. sorry thats a D15B7 mistype. brain is fried after work