Rep Power: 0

So I went to install my ingalls engine tq dampener and first of all the instructions completely suck and are all wrong. Second i can't get the damn thing to fit so here's some pics. tell me what im doing wrong. The ABS module seems to be completely in the way but supposedly you could make it work on the EX so help me fast I have school soon!

Thanks,
Shane

 
Rep Power: 269

There's a DIY, pics are gone but it might explain it for you. There are a handful of threads about these being installed and I'm sure you could find a pic if you try.

As far as I know, the ABS bracket can be bent to provide a bit more clearance for the stiffy.

 
Rep Power: 269

Photo from KINGCHILE:

 
Rep Power: 0

thanks thats not how the manual says it but hey ill give it a try thats prob how us ABS guys gotta get it done. thanks much

 
Rep Power: 257

the one in the pic is mounted on the wrong side of the engine mount bracket.

 
Rep Power: 269

I just searched for the pic in the gallery, don't have one myself. Where is scansel these days? I think he did the DIY and installed it on an EX w/ABS.


EDIT - Here is his gallery with the pics

 
Rep Power: 278

That's the way I see it installed on all the civics with ABS.

 
Rep Power: 257

doesnt make it the right side. its designed for dx/lx. ex guys are supposed to move the abs module.

 
Rep Power: 278

Well, dont want to start a new thread, and this is related. Im installing the motor mount plate and the ABS is in the way, so how did you guys move the ABS unit and also did you guys just move the clutch reservoir over for the strut plate and have it touching it on a slant? (I did relocate the clutch reservoir down one spot already)