***toronto Discussion***
Registered!!
iTrader: (12)
Joined: Sep 2003
Posts: 2,086
Likes: 1
From: Canada, Hamilton, Ontario
Rep Power: 0 
Originally Posted by 1llmatic
John from Option JDM can get that lip for you.
www.optionjdm.com
www.optionjdm.com
question to all you guys...I'm going to purchase M3 Mirrors they came off an 02 vic coupe will they fit my 04 without any modifications? I believe that there the same can anyone confirm that.
Registered!!
iTrader: (12)
Joined: Sep 2003
Posts: 2,086
Likes: 1
From: Canada, Hamilton, Ontario
Rep Power: 0 
Originally Posted by 1llmatic
its not listed on the website. But they can get the lip in special order.
keep in mind its not cheap to buy.
just tell John that you want the lip that Ming had.
keep in mind its not cheap to buy.
just tell John that you want the lip that Ming had.
Registered!!
iTrader: (2)
Joined: Feb 2003
Posts: 1,279
Likes: 0
From: Mississauga, Ontario, Canada
Rep Power: 295 
Originally Posted by 1llmatic
a whole lotta cash!...don't want to remember the exact dollar figure but around 10-15k...
i had to buy almost everything new from honda and acura.
you could probably get it done for cheaper now if u can find used parts etc...
i think the motors are more expensive now too.
a friend of mine just picked a jdm k20a up for $7k a couple weeks ago.
swap was done at defcon...they aren't cheap...but you pay for what you get...i've never had a single problem with my car...it runs mint all year around...winter...spring...summer...fall...
i had to buy almost everything new from honda and acura.
you could probably get it done for cheaper now if u can find used parts etc...
i think the motors are more expensive now too.
a friend of mine just picked a jdm k20a up for $7k a couple weeks ago.
swap was done at defcon...they aren't cheap...but you pay for what you get...i've never had a single problem with my car...it runs mint all year around...winter...spring...summer...fall...
Originally Posted by astrosi
Hey PPL
I'm John , Woodbridge .. i Drive a Blk 02 si ... Little stuff here and there .. mostly suspensions
I'm John , Woodbridge .. i Drive a Blk 02 si ... Little stuff here and there .. mostly suspensions
Originally Posted by MrXclusivE
Hey MrXcluzivE yeah ... Suspensions and rubber ... But my funds on a k20 is still up and running .. if i can't beat them in straight away .. try me on corners
I'm done with suspension, just installed Tein ss coilovers and a Neuspeed Strut bar, Progress sway bar is sitting in my garage waiting to go on. Now I'm on the hunt for light wheels and high performance summer tires
.
. I've got another question. I know BIG is selling the Dezod PnP harness for the emanage ultimate, and i have the regular blue emanage...is it the same shizzle or am I going to need to cut up my wiring harness.....
I want spring to come so I can get all my parts in...my basement is looking like a chop shop.
I want spring to come so I can get all my parts in...my basement is looking like a chop shop.
hi I'm Kin, 01 acura 1.7el owner, knew some of you in the last meeting in summer...Car pretty much like stock just..
Tinted 20% all around;
Front C-west lip, custom front grille, 05 oem side skirt and rear lip, shaved rear trunk, JDM rear taillights, brightstar 6500k HID, 05 oem headlights;
Lowered with koni yellow with neuspeed racing spring, front neuspeed strut bar, rear upper strut and lower bar,and RSX rear 19mm sway bar;
Rays 17" GT-P rims with hercules G5000 rubbers;
DC header, K&N typhoon sri with heatshield, Ground wires upgraded and reactive axle back exhaust;
Tom's Motorsport racing seats, momo steeling wheel, razo shiftknob with boot ,pioneer DEH-P8MP headunit, infinity component front and loudspeaker rear;
Also diy tight throttle cable, painted interior, leds....
Tinted 20% all around;
Front C-west lip, custom front grille, 05 oem side skirt and rear lip, shaved rear trunk, JDM rear taillights, brightstar 6500k HID, 05 oem headlights;
Lowered with koni yellow with neuspeed racing spring, front neuspeed strut bar, rear upper strut and lower bar,and RSX rear 19mm sway bar;
Rays 17" GT-P rims with hercules G5000 rubbers;
DC header, K&N typhoon sri with heatshield, Ground wires upgraded and reactive axle back exhaust;
Tom's Motorsport racing seats, momo steeling wheel, razo shiftknob with boot ,pioneer DEH-P8MP headunit, infinity component front and loudspeaker rear;
Also diy tight throttle cable, painted interior, leds....
^^it's silver....
Hey just wanna ask any modding plans in the coming summer, I will...
redo the painting interior(lot of scratching),
hope can find a hybrid wing or M3 lid wing on the truck,
manual swap(saving money)...

Hey just wanna ask any modding plans in the coming summer, I will...
redo the painting interior(lot of scratching),
hope can find a hybrid wing or M3 lid wing on the truck,
manual swap(saving money)...
hey guys im albert i own a 2003 civic sedan,
here are the things i did to my car:
alpine head unit, 4 - 6 1/2 alpine type s speaker, 1 jl audio sub, kicker amp for the sub, rockford for the 6 1/2.
exterior: tenzo mean 6, yokohama tires, jdm headlight, cleared turned signal, type-b rear lip, spoon style front lip, i have a side skirt but i don't know what type, front grill. my next plan is to lower the car, but i have to make a choice between putting my savings towards my closing cost, because i recently purchase a condo, by the way im from mississauga. i'll post a recent picture of my car soon.
here are the things i did to my car:
alpine head unit, 4 - 6 1/2 alpine type s speaker, 1 jl audio sub, kicker amp for the sub, rockford for the 6 1/2.
exterior: tenzo mean 6, yokohama tires, jdm headlight, cleared turned signal, type-b rear lip, spoon style front lip, i have a side skirt but i don't know what type, front grill. my next plan is to lower the car, but i have to make a choice between putting my savings towards my closing cost, because i recently purchase a condo, by the way im from mississauga. i'll post a recent picture of my car soon.




He might still have the lip

