Rep Power: 0

It is only 10 more minutes past Detroit [IMG]i/expressions/face-icon-small-wink.gif[/IMG]

 
Rep Power: 340

Huy: i havnt got around to installing them yet.. actually im still waiting for my camber kit to come in..


as for a meet this season, im totally down. i dont care wat day, just lemme know like 2 weeks in advance

 
Rep Power: 0

Huy, tell me more about the cheaper Teins and Tonikos please! Any time frame when they are expected out and so on.

As for a 7th generation meet. I think we need a civic meet. All our danged black civics look the same, need some variation I think. I am sure I could get the del sol guys from unleaded racing to come. We just need a meeting spot. I am not going to wait for a Friday meeting spot either. I am on the hunt for a place to use now. We know we got Flexivity any day of the week so that is the place I am thinking. The redline meets are getting gaye at Star Southfield. There is no freaking light there. It is just there is noway that them people will make the drive downriver. They expect everyone to make their drive though.

Ok, I just sent an e-mail to Jeff asking if we could use the lot again this year. I also asked him if he wanted to set up a big car or Civic meet on a weekend during business hours. That way they might do soem business too.

 
Rep Power: 340

good idea bobby. flex seems to be a good place since its easy to find and its out in the open. also theres fast food places near by if someone wants a bite to eat. or maybe even some actual resturaunts like red robin or something.

 
Rep Power: 0

Jeff just said we could use the lot whenever we want. I am going to head up there this week to price audio stuff. I need a cd player, amp, and sub.

 
Rep Power: 0

Well my plans are kind of delayed for the moment but i will be ready for SD3 so as for now the tiens are on hold i bought a pool table and air hockey table i needed some entertainment


Ohh! I did buy a tv for my car

 
Rep Power: 0

I am sure I won't be dropping my car this year. Too many other companies coing out with stuff so I will wait and see what theirs cost. I think I am going to get a short shifter, CD player, Amp, and sub or subs. I think I want just one 12" instead of one 10". I also just talked to NX about a nitrous kit but I have way too much research do to on this before I decide on getting one.


What kind of pool table did you go with? I could of probably gotten you one for a good price from Ball and Cue. And I know a guy that deals with all the local bars for bar tables.

 
Rep Power: 340

i want a pool table but theres no room left in the house to put it..... poo

hey edgar, for your stock exhaust, is it on your car right now? or is it just sitting in your garage? cuz if its just sitting there, i could come pick it up or something so i can do the swap (gotta get this done before march 10th) and drop off my exhaust after its done or watever. oh, and my camber kit finally came in. so we can do that install whenever too

 
Rep Power: 0

Nothing fancy its a 7ft Club addison 1" slate ebony color with titan steel gray cloth and platinum pool ***** the air hockey is an Dynamo Artic wind 7ft air hockey(commercial grade) next on my list is a fooseball table and a dome hockey oh and cant forget a card table

 
Rep Power: 0

the stock exhaust is sitting on top of my garage (storage area) i took that thing off my car the first week i got my car so it's like brand new
as for the install its to cold to do anykind off work like that out in the cold, so if you want to pick up the exhaust thats fine with me what about the mid pipe is it going to bolt up to the stock pipeing

 
Rep Power: 0

I got a crappy card table in my basement that my uncle won't come and pic up. [IMG]i/expressions/laugh2.gif[/IMG] It's ok though cause I use it more than him anyway

 
Rep Power: 0

FOR SALE:

10" JL Subwoofer in custom box. Also have a JL empty wedge truck box I will throw in for free if you want it. Or it is going in the trash.
$150 OBO

 
Rep Power: 304

Hey all. This is a show at my university put on by our club. There will be upwards of 2500 peope there. This takes place during Ferris Fest. There will be a couple R&B groups there on the main stage (about 100 yards from the car show site), last year we had 112 and Jagged Edge.. not released who we have this year (hurd rumors of Clipse and Ashanti sp? and maybe Lil' Bow wow) We will have a sound comp the day of for 5 dollar entry. Full venders (will give names when full list is together) Dodge will have a SRT-4 on hand. Live DJ's all day long at the car show. 50/50 raffel, door prizes and more. About a 2 and a half 3 hour drive from D town. The concert is free to all also. Hope to see you some of you guys out there, should be a damn good time. Let me know if you have questions. Later all

~nick~

 
Rep Power: 340

wat do you mean if the mid pipe is going to bolt up? i bought stock downpipe and cat, so it should bolt right up to it and everything. if you're talking about my exhaust, i have to unbolt it where the header and downpipe meet and take it off from there since the downpipe and cat is welded together.

oh, and could i pick it up tomorrow sometime? i got nothing planned so if you're workin, i can swing by at night or watever.

 
Rep Power: 0

I just installed my SRI, it sounds great when I accelerate now. My Goldline springs came in about a week ago and I am thinking of waiting to install them until I have rear and front strut bars and a camber kit (and new wheels [IMG]i/expressions/face-icon-small-smile.gif[/IMG] ) then I will get my kit and finally my exhaust system. The only problem with all of this is that I cannot find a job yet which I need to pay for all of the stuff I want to get [IMG]i/expressions/face-icon-small-frown.gif[/IMG]. I will be installing the rest of my alteezas this weekend because I have to remove the bumper and it is too cold in my garage to do it so I am going over to some guys house. What kit do you guys recommend for a 4dr? And does anyone know how to remove the rear bumper? Because I am planning on doing by looking for what looks like it should come off and taking it off until the bumper can be pulled off.

 
Rep Power: 340

you dont need strut bars to install the springs. but a camberkit depending on how low the drop is (lower the drop, camber will be setoff more). since you're going with springs, you might want to look into new struts. like shocks. as of now, i think koni is the only one out. but tokico is coming out with one soon.. or maybe its out already? as for the rear bumper, i have no idea.. im guessing theres a few screws over by the rear wheel well, and probably behind the bumper.. and its probably clipped in like the front bumper.

 
Rep Power: 0

hey does anyone know where i can get a mandrel bent exhaust done in the detroit metro area???? and also how much is a good price?

 
Rep Power: 0

Im sure just about any muffler shop will do what you ask for, might be a little pricey but not sure
Welcome ...I dont think you've been on this forum , if not stay active because we will be having some meets this coming season it'll be good to meet with everyone

Edgar

 
Rep Power: 0

I am pretty sure not too many custom shops do mandrel bent piping. I think it is hard to come by for a custom and if you do find one yes, it will be pricey. Better off with a cat back.


HOW are the MTX 18000D amps?

 
Rep Power: 340

im not aware of any shops around here that do mendrel bent... just DONT goto Quality Brakes and Mufflers in wyandotte.. thats where i went and they ****ed up big time on my car

MTX 18000D amp? hmm, not sure of the exact model, but MTX amps arnt too shabby. ask around in the ICE forum. im sure mohawkboom can answer all your questions.

Edgar, lemme know if i can swing by today. call my cell phone cause i probably wont be home to check the boards. (734)552-2063

 
Rep Power: 0

bobby, no info on the suspension yet.

autowerks can do madrel bent pipping and powdercoat or ceramic coat the pipping for you.

 
Rep Power: 0

thanks for the info guys. i'm gonna call autowerks tomorow and get a price if it's more than $200 i think i'm just going to get the magnaflow cat back.

 
Rep Power: 0

Well, looks like I am doing my stereo system for sure this winter Should be

 
Rep Power: 340

if anyone has a stock midpipe from an EX coupe, lemme know


EDIT: just found someone with it, so im all good now.. now i just need to go out and buy the rubber hanger mounts and i should be all set. oh wait.. i need a muffler cuz the hanger isnt on that

 
Rep Power: 0

i have the muffler with the pipe from the axle back

 
Rep Power: 340

alright sweet.. thanx edgar. hey i was wondering.. if you still want my exhaust, i'll sell it to you cheap since i had to buy the midpipe. i duno how much yet, but gimme a price you'll be able to work with

 
Rep Power: 0

hey peepz... just thought i drop my $0.02 on this thread. anyone here running the NBP civ north east metro detroit? like around the macomb community college at 12 and hayes? i'm not the only one out this way it seems.

 
Rep Power: 0

Hey my sister goto that school. But she have a 2001 neon.[IMG]i/expressions/face-icon-small-smile.gif[/IMG]

 
Rep Power: 304

Im up that way with a NBP. You might have seen me a time or two, but I'm at college upnorth right now so maybe not. Is it stock? If not, what is done to it? Later

~nick~

 
Rep Power: 0

Good to see more members from the Detroit area stay active for upcoming meets