Espelir JGT500R exhaust: Purchase and Review
#1
2k1civic.com O. G.
Thread Starter
iTrader: (2)
Join Date: Jun 2001
Location: PhILLy, Pennsylvania, US
Age: 40
Posts: 3,165
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 310 Espelir JGT500R exhaust: Purchase and Review
EDIT* - Purchased and installed. Additional pictures on page 2. Sorry for the green lines through the pictures. IT seems as if my camera phone crapped out (Treo 650).
** Shouts to Diskreet for image hosting!!!!!
First this first, Its a pain in the *** to get a lowered car with sideskirts onto a lift.
Heres my old cheap peice of crap 100 buck 2 inch crush bent piping exhaust. Attached was a "N1" styled muffler with no resonator. It was loud as hell, rusted, and now has a nice coat of black plastic paper bag.
These nuts were rusted on pretty good (60,000 miles). I had to torch the hell out of them to get them off.
Once it was off the ESPELIR went on!!!!
The fit is ABSOLUTELY BEAUTIFUL!!!!!!!!
Recap.
THe exhaust is Amazing. It fits absolutely perfect. (5 out of 5). It clears my G5 rear lip perfectly! The sound is definitely a change from that RIcer *** N1 muffler i had. This has no rattle or buzzy sound at all. Its totally street legal (95 DB) and its DEEEP. As far as power increase i cant really say. I mean come on, i drive an Automatic civic with 18 inch wheels. But im sure the diameter of the piping, straight through design, and smooth bends increases power!
Lesson learned, Dont waste money and get cheap *** stuff just to have a "mod". Save your money and get something that is QUALITY!!! ESPELIR IS IT!!!
Propz to DEZOD, you can all PM him and order yours now! Be the first on your block!
THe exhaust is very slightly angled to the right!! I like!!
Picture courtesy of Dezod:
** Shouts to Diskreet for image hosting!!!!!
First this first, Its a pain in the *** to get a lowered car with sideskirts onto a lift.
Heres my old cheap peice of crap 100 buck 2 inch crush bent piping exhaust. Attached was a "N1" styled muffler with no resonator. It was loud as hell, rusted, and now has a nice coat of black plastic paper bag.
These nuts were rusted on pretty good (60,000 miles). I had to torch the hell out of them to get them off.
Once it was off the ESPELIR went on!!!!
The fit is ABSOLUTELY BEAUTIFUL!!!!!!!!
Recap.
THe exhaust is Amazing. It fits absolutely perfect. (5 out of 5). It clears my G5 rear lip perfectly! The sound is definitely a change from that RIcer *** N1 muffler i had. This has no rattle or buzzy sound at all. Its totally street legal (95 DB) and its DEEEP. As far as power increase i cant really say. I mean come on, i drive an Automatic civic with 18 inch wheels. But im sure the diameter of the piping, straight through design, and smooth bends increases power!
Lesson learned, Dont waste money and get cheap *** stuff just to have a "mod". Save your money and get something that is QUALITY!!! ESPELIR IS IT!!!
Propz to DEZOD, you can all PM him and order yours now! Be the first on your block!
THe exhaust is very slightly angled to the right!! I like!!
Picture courtesy of Dezod:
Last edited by AzNmiKex215; 09-26-2005 at 05:23 PM.
#5
7thgen Power Maker
iTrader: (74)
Join Date: Sep 2003
Location: Buffalo, NY, US
Posts: 9,048
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 0
Originally Posted by AzNmiKex215
Okay, i still dont think ANYONE has this exhuast yet. Maybe 1 or two members? I beleive theres 1 picture floating around but not much else.
I heard the exhuast on an Integra and i liked it. I am going to make the plunge and order one and post a FULL pictorial and Review!!!
Any Vendors out there willing to hook up a price for me? Please PM me!! lowest ive found was $504.00
Picture courtesy of Dezod:
I heard the exhuast on an Integra and i liked it. I am going to make the plunge and order one and post a FULL pictorial and Review!!!
Any Vendors out there willing to hook up a price for me? Please PM me!! lowest ive found was $504.00
Picture courtesy of Dezod:
We sell it normally for $530 plus shipping, however if you really want to purchase it, and write a review on it on our site and here, we will cut you a deal.
PM me if interested.
#7
Registered!!
Join Date: Sep 2004
Location: los angeles
Age: 39
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 242 i got one .....it ran me 500....its pretty loud...but .....the exhaust is pretty big...i scratched the **** out of it...the bottom of it ...is scratched......but ya....i like it...cuz for one...no one has it....!!!!..i have a banner that i got when i got it
#8
Escaped Convict
iTrader: (30)
Join Date: Jun 2001
Location: Westminster, California, US
Age: 41
Posts: 6,450
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 344 here's the wack thing. I ran across one for $250.
on ebay. i was like okay what warehouse did these foo raided.. but they were listing crapload of 'em.. and with actual feedbacks too.
funky. and its not like they add $250 to shipping too. only another $50.
on ebay. i was like okay what warehouse did these foo raided.. but they were listing crapload of 'em.. and with actual feedbacks too.
funky. and its not like they add $250 to shipping too. only another $50.
#9
2k1civic.com O. G.
Thread Starter
iTrader: (2)
Join Date: Jun 2001
Location: PhILLy, Pennsylvania, US
Age: 40
Posts: 3,165
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 310 It doesn't sound too loud in this clip here. Was it similar to this? http://www.honda-tech.com/zerothread?id=949491
#12
Registered!!
iTrader: (7)
Join Date: Oct 2004
Location: New Jersey
Age: 41
Posts: 9,070
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 337
Originally Posted by AzNmiKex215
It doesn't sound too loud in this clip here. Was it similar to this? http://www.honda-tech.com/zerothread?id=949491
#20
2k1civic.com O. G.
Thread Starter
iTrader: (2)
Join Date: Jun 2001
Location: PhILLy, Pennsylvania, US
Age: 40
Posts: 3,165
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 310 *EDIT - Updated with a few higher res pictures.
I hope to install tommorow night or friday night!
**The Exhaust was VERY WELL PACKAGED. You could not hear a single "cling or clang" while handling the box.
**The Bends are all Perfect, The diameter stays even through out, The bends are as smooth as butter!!!!
**The Canister is amazingly beautiful!!!
**About a 4 inch exhaust tip!!!!
**About 2 and 1/4 inch diameter piping all the way through!!!
**The spring silencer is designed to hold the silencer in snuggly and is there to prevent vibration. (which is a terrible and ANNOYING experience with my Megan N1 style muffler).
**Overall, Id say i got a VERY good product. What can you expect when the same company that makes the exhaust makes VOLKS wheels and ARC cooling systems!!
If anyone has any questions about this exhaust please ASK!!!! I never reviewed anything so I may forget to mention things other people might want to know.
Props to Dezod!!!!
I hope to install tommorow night or friday night!
**The Exhaust was VERY WELL PACKAGED. You could not hear a single "cling or clang" while handling the box.
**The Bends are all Perfect, The diameter stays even through out, The bends are as smooth as butter!!!!
**The Canister is amazingly beautiful!!!
**About a 4 inch exhaust tip!!!!
**About 2 and 1/4 inch diameter piping all the way through!!!
**The spring silencer is designed to hold the silencer in snuggly and is there to prevent vibration. (which is a terrible and ANNOYING experience with my Megan N1 style muffler).
**Overall, Id say i got a VERY good product. What can you expect when the same company that makes the exhaust makes VOLKS wheels and ARC cooling systems!!
If anyone has any questions about this exhaust please ASK!!!! I never reviewed anything so I may forget to mention things other people might want to know.
Props to Dezod!!!!
Last edited by AzNmiKex215; 09-24-2005 at 01:21 AM.
#30
I just burnt my tongue
iTrader: (8)
Join Date: Mar 2004
Location: Chino Hills, CA
Age: 37
Posts: 4,990
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 296 all i need is a muffler...i can get full stainless steel piping done custom for $200...i want a greddy or apexi titanium with colored tip muffler