cams custom grind ?
08-14-2003
#1
Registered!!
Thread Starter
Join Date: Feb 2003
Location: Mesa, Arizona, US
Age: 42
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 
cams custom grind ?
OK I have heard alot about cams custom grindings I have heard that it can increase hp up to 20% depending on the grind they are using. I have found a few places that do this but nothing for a 01 civic. And I am not sure how you can get 20% more hp out of a stock cam by just grinding it. Does any one know if this is true and where is a shop that has gridings for our cars....
08-14-2003
#2
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Join Date: Jun 2002
Location: Clovis, California, US
Posts: 2,856
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 295 Last edited by EManEX; 08-14-2003 at 12:14 PM.
08-14-2003
#5
Registered!!
Thread Starter
Join Date: Feb 2003
Location: Mesa, Arizona, US
Age: 42
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 ok I still didnt find any for d17a engines, my friend is getting one done for his 89 accord and it is going to cost 70$ which includes shipping.....supposed to increase 20%......
08-14-2003
#6
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Join Date: Jun 2002
Location: Clovis, California, US
Posts: 2,856
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 295 No they don't have one specifically for the D17 but I think this is what you want
Part Number 65021
VTEC (SOHC) - Custom ground. Specs available only after seeing your factory core.
Or if you want to make sure call them at 619-422-1191
Part Number 65021
VTEC (SOHC) - Custom ground. Specs available only after seeing your factory core.
Or if you want to make sure call them at 619-422-1191
08-14-2003
#11
OsOBaNNeD
iTrader: (5)
Join Date: Mar 2002
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 info? lol heres ur info... see that below.. thats my car ..with the front end off... the hood off... and just sitting there with a h ole in the block. im getting a new engine next week... so the cam is inside there 
that enough info?
that enough info? 
I think he just wanted to know if it was regrind or stock.
08-14-2003
#16
OsOBaNNeD
iTrader: (5)
Join Date: Mar 2002
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Originally posted by mInImE
the info I am looking for is more like how much....how many miles on it..things you should know before you buy something...
the info I am looking for is more like how much....how many miles on it..things you should know before you buy something...
60k on it. mint condition. no its not a regrind... as NOTED in the post above.. I have a CAM if someone wants to send it OUT to get a regrind.. that way ur car isnt sitting around waiting for a cam and you can still drive it ... as far as price.. 100.
Last edited by OsOBooSTeD; 08-14-2003 at 12:54 PM.
08-14-2003
#20
Registered!!
Thread Starter
Join Date: Feb 2003
Location: Mesa, Arizona, US
Age: 42
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Originally posted by Green Civic
Would this help in a turbo application? Or wait for a turbo cam? Thanx.
Would this help in a turbo application? Or wait for a turbo cam? Thanx.
If you go to this link they have grinds for turbo apps. not sure which is best....
http://www.crower.com/cat/import/honda/camshafts.shtml
08-14-2003
#22
Registered!!
Join Date: Apr 2002
Location: Oakland, CA
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Originally posted by OsOBooSTeD
well see you should have just asked that.. im not a mind reader.
60k on it. mint condition. no its not a regrind... as NOTED in the post above.. I have a CAM if someone wants to send it OUT to get a regrind.. that way ur car isnt sitting around waiting for a cam and you can still drive it ... as far as price.. 100.
well see you should have just asked that.. im not a mind reader.
60k on it. mint condition. no its not a regrind... as NOTED in the post above.. I have a CAM if someone wants to send it OUT to get a regrind.. that way ur car isnt sitting around waiting for a cam and you can still drive it ... as far as price.. 100.
08-14-2003
#23
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (34)
Join Date: Jun 2002
Location: so cal djmota=oscar
Posts: 3,242
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 299 Originally posted by Da2K1
Gude does regrinds also. I have it installed on my car. It's better than all my other mods put together (I/H/E)..
Gude does regrinds also. I have it installed on my car. It's better than all my other mods put together (I/H/E)..
just the cam or did you get thier package thing? I am curious because there has been so many Gude sucks post on here but very few people that have actually used them. If so how do you like it? cost? HP gains, 1/4 mile times, or just your plain opinion. How many niles with it installed. any info would be appreciated.
08-14-2003
#25
Registered!!
Join Date: Mar 2003
Location: SF, California, US
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 i got just the CAM. I didn't want the whole package, as i didn't know anyone i trusted who had it.
When i talked to Bill Gude about the cars that got messed up, he mentioned it was the shop that did the install that was at fault. My shop (DSR) confirmed this was possible.
They have had numerous cars w/ Gude cams installed & good results on the dyno. So i got the Gude cam. The cam install itself requires a CAM gear to tune it (as the regrind will alter TDC) & the valves need to be adjusted also. As i don't have a CAM gear, i don't have the full potential of the cam. I'm also lucky my car runs OK).
It costs $ 300 or so (don't quote me; i don't remember, it's been a while) you can call for a quote.
When i collect a $1000, i'll have some more head work done & a dyno session to tune my car . Don't hold your breath, though, as it'll be a while. (Unless y' all wanna donate!!)
EDIT:
Gude claims 18 bhp to the wheels & i'd say he's not far off, though i can't back it w/ o a dyno.
You could use a cam w/ a turbo for better results. Just make sure you get it done at the same time & the person knows you have a FI moter, as the grind can be more aggressive for better results.
When i talked to Bill Gude about the cars that got messed up, he mentioned it was the shop that did the install that was at fault. My shop (DSR) confirmed this was possible.
They have had numerous cars w/ Gude cams installed & good results on the dyno. So i got the Gude cam. The cam install itself requires a CAM gear to tune it (as the regrind will alter TDC) & the valves need to be adjusted also. As i don't have a CAM gear, i don't have the full potential of the cam. I'm also lucky my car runs OK).
It costs $ 300 or so (don't quote me; i don't remember, it's been a while) you can call for a quote.
When i collect a $1000, i'll have some more head work done & a dyno session to tune my car . Don't hold your breath, though, as it'll be a while. (Unless y' all wanna donate!!)
EDIT:
Gude claims 18 bhp to the wheels & i'd say he's not far off, though i can't back it w/ o a dyno.
You could use a cam w/ a turbo for better results. Just make sure you get it done at the same time & the person knows you have a FI moter, as the grind can be more aggressive for better results.
Last edited by Da2K1; 08-14-2003 at 05:30 PM.
08-14-2003
#26
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (34)
Join Date: Jun 2002
Location: so cal djmota=oscar
Posts: 3,242
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 299 cool bro! thanks for the good info. 
i have been wondering how good a reground cam would work out.
how long have you been running with it installed? Did you notice any changes in your mpg?
thanks once again
i have been wondering how good a reground cam would work out. how long have you been running with it installed? Did you notice any changes in your mpg?
thanks once again
08-15-2003
#27
OsOBaNNeD
iTrader: (5)
Join Date: Mar 2002
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Originally posted by aki
Man, why do you have to act like a bratty kid? Grow up.
Man, why do you have to act like a bratty kid? Grow up.
08-15-2003
#28
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (2)
Join Date: Feb 2003
Location: San Diego, Ca
Age: 40
Posts: 9,950
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 359 
i wouldn't mind dropping my car off to them for a day and doing a regrind and getting it at the end, i wonder if they do that or if they only do it by mail? this sounds like a good mod and well worth the money
08-05-2005
#30
Registered!!
iTrader: (8)
Join Date: Aug 2003
Posts: 1,570
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 So far not much people have done it, I want to go all motor and i was thinking to regrind the cams also. What spec should i go for the best result with stock valve train
thanks
thanks
