Rep Power: 261

were all in the list guys!!!!!!!

 
Rep Power: 234

Sweet I just got the Tokico Blues installed today. Also installed the Neuspeed front bar. Went to install my Stiffy torque damper and found out the dude who I bought it from on this forum forgot to send the bolt and mounting bracket.. Well one of them.. So I need him to either send me the other mount or make me the other mount.

We shall see on whats next for the whip. I'ma start saving for some flat black 16" slipstreams.

 
Rep Power: 261

if your using your stock top mounts from your suspension, just to let you know the ingalls stiffy will not work with the neuspeed bar unless your using the top mounts like tein provides with their coilovers that has the extended and longer screw prongs. Our stock ones are too short, and if your getting a thinner bolt to screw it in with the ingalls mounting bracket and neuspeed bar, it is not recommended, there have been stories of it popping out and the ingalls stiffy becomes less effective due to its weakness of holding three objects at once. You gotta go with either or. if Drag racing go with the stiffy or making sharp corners stay with the neuspeed bar. good luck

 
Rep Power: 234

Actually the bracket for the stiffy and the neuspeed bar work perfectly together I got both of them on and I got 5 complete turns down on the screw which is plenty because it hit the recommended 31-33ft lb tq.

This has been discussed many times before on multiple threads.

 
Rep Power: 261

are you sure cause when i bought it brand new with my neuspeed bar, it was impossible so i ended up returning it because of the less thread bite from the nut. the previous owner must of drilled the inner socket holes of the neuspeed bar thinner on the drivers side. Its also been discussed on other threads as well that this wont work. If it did work im sure it did not bite all of the threads than it would normally, thats what worried me the most.

Look and tell me how did it work? That thread is too small to get you get 5 complete turns with the stock bolts


link:
https://www.civicforums.com/forums/1...ue-damper.html

By the way how did you put on the bracket if the sender forgot to send you the mounting bracket?perhaps how did you put it on without the mounting bracket to begin with?

 
Rep Power: 234

Thats the thing the bracket on the strut top is the one he sent me. The one that mounts to the engine is the one he forgot so as of right now I have the bracket on the strut and the bar in the box. Until I can find the engine bracket or have one custom made it's just chillin on there.

From the looks of the pics mine probably has more threads visible than that. I'll show you when we get together for the shoot.

 
Rep Power: 261

cool, well if it works go for it man.

 
Rep Power: 234

works like a charm just wish I had what I need to finish the install...

 
Rep Power: 261

well we will see when you finish the install to see how if it works. if it does work, i guess you proved all of the people here wrong.

 
Rep Power: 234

the bracket and neuspeed bar are already installed. i've already done so.

 
Rep Power: 0

yeah chris, thats great that you've got the spots reserved, thanks again see you guys there.

 
Rep Power: 261

see you there man. hit me up if you have any question. that goes for anyone too.

update: i should recieve my car this wednesday from the body shop, if i forgot to tell anyone it was keyed all over my car right when i got it back. its been in the shop for about a week now for repairment and other things.

 
Rep Power: 380

The 23rd? I'll be half way to San Diego before this event even starts. Next time maybe.

 
Rep Power: 0

jeese chris. someone doesnt like you very much lol

 
Rep Power: 0

ok so i got my car runnin yesterday. i put in an em2 CMC because my DC5 one blew. i never had an em2 one so i dunno if its me but it feels funky. ohh well it'll have to do.

 
Rep Power: 234

cmc? clutch master cylinder?

 
Rep Power: 261

eeehhhh doesnt matter to me im cool

 
Rep Power: 0

yup my clutch master cylinder. It was a bitch to put in. How you like your neuspeed?
Anyone going guted to the meet?

 
Rep Power: 234

Neuspeed is great. I just got my energy suspension bushings for the rsx rear sway, should be installed sometime this weekend. Hopefully I can get this bracket for the Stiffy custom made so I don't have to spend 80$ on one from Ingalls.

Wanna gut me?

 
Rep Power: 261

not me im going fully loaded.

 
Rep Power: 234

btw, I was joking about the guttin me part.

I like my EX an EX. :beer:

I can't wait for the meet and show. I need to start gettin cash together for a paint job too. So much to do. I need to be a drug dealer or something. jk

This working stuff sucks. :X

 
Rep Power: 0

hhhmmm maybe i should put my car back together again? well i like the rsx rear sway bar. and i wish i had a job..im broke and i dont have money to finish my car.

 
Rep Power: 0

oh by the way does anone need new fenderliners (inner wheel well) or whatever.. free99!!..just trying to get rid of em.

 
Rep Power: 261

Do what you want to do man, ive never seen a gutted 7thgen so i think it would be pretty interesting, so id so do it.

dont you want keep the fenderliners on? they do protect in those rainy days. anyways man cant wait to see your ride.

 
Rep Power: 234

Only gutted 7thgen I've seen besides Bart was at the Sema show.

 
Rep Power: 234

Shows coming closer. Ordered new fogs since the ones I just bought just ate a rock. Should be here before meet. Hopefully gonna get this rsx sway in there this weekend. Possibly purchased Mugen style lip.. custom fab a mounting bracket for Stiffy. Day of the meet I'm gettin the car fully detailed I hope. Will update soon.

Chris, Time & Loc of Meet before show. 6 days and counting.

 
Rep Power: 248

Dam looks like everyones in a rush to finish their cars, Got my momo steering wheel put on two days ago feels pretty good and looks good. thinking about putting my front type r lip back on but not sure yet, looks ok without it i need a new one old one has a crack. hmmmm choices..

 
Rep Power: 234

do it. buy a new one or repair the old one!

 
Rep Power: 261

alright guys ive been doing some thinking, since some people are not able to make it to the meet at 3pm i would like for everyone to make it to the photoshoot.
If you guys want we could do a meet, photoshoot, and cruise on this coming thursday at 6pm. I find this better because it is at a much cooler weather and everyone has a chance to be in the photoshoot.

then on friday we could meet up at the same spot at 5:30pm before going to the findlay honda meet to cruise together and show up at findlay honda at the same time that way we could all park next to each other.

let me know guys so i can make it official by tomorrow.

 
Rep Power: 261

by the way the official place to meet is at townsquare at the top of the garage, there would be plenty of room for all of us and easier to manage our photoshoot.