Rep Power: 0

So I finally got around to finding the code that my ABS light threw.
Its saying my brake pressure switch is the issue?. Anyone have knowledge on this or where it is? I quickly browsed my manual and i didnt see anything with such a name. Brakes are all just fine even after new pads in the fall. Just want this light gone.

 
Rep Power: 518

What car, specifically?

What is your code number(s)?

 
Rep Power: 0

95 civic ex 1.6 vtec

I did the check a while ago but it flashed the abs four times. I may have looked at the incorrect ABS code list but unsure on that.

 
Rep Power: 518

You shouldn't have a code 4 like that.
Maybe you aren't reading the flashes correctly.

With the SCS diag connector jumpered, turn the key to ON (engine not running).

ABS light comes on for one second and goes out for 2 seconds, then starts flashing codes.

Flashes, then a one second pause, then more flashes = 2 digit code. First set of flashes is the first digit, second set after the ONE second pause is the second digit.

5 second pause. A 5 second pause separates individual codes.

Next code flash sequence starts.

Up to 3 different codes can be stored in memory.


I don't see a code 4 by itself.
The only single digit code in my chart is #1.

All the rest are 2 digit codes.

Try again?