Donniep2289

Hey everyone, I have a pretty serious issue going on. I recently purchased a 94 ex 1.6 vtec with an auto transmission. At first it pulled a 15 and 17 code. Not worried about the vss. I put new internals for the distributor, icm coil all that stuff. Nothing allowed the motor to start. Timing is in the correct place all new guts on the distributor. So I tried another ecu today and few other things. It started and ran for about 5 minutes, then died again. The motor will spin, has fuel but no spark. Now the gods I am getting is code 0. This didn't happen with the old ecu but is now happening with the old and new ecu. Only thing I can find is a bad group or a bad hot. I have no idea where or what colors these wires are. Can someone please help me out here.