body kit install ?
Thread Starter
ThE FaMiLy SeDaN
iTrader: (21)
Joined: Jul 2002
Posts: 4,221
Likes: 0
From: UCF, Florida, US
Rep Power: 0 
body kit install ?
i just bought a erebuni shogun body kit and its fiberglass. it already has all the holes etc. i know how to emove front bumper to install the front fasia but how would i go about removing back bumper can anybody give me rought DIY on how to do it. i think that im gonna get a professioal shop to do the sides cause dont they have to be glued on or soenthing????
riley
riley
Joined: Oct 2002
Posts: 4,248
Likes: 2
From: Rockville, Maryland
Rep Power: 331 
the rear bumper is even easier than the front. you dont need a DIY. just remove the screws that attach it to the rear wheel well and then the little pins in the trunk lid threshold. the rest is pretty straight forward, just pull it off. as far as the sides, any good adhesive will do, but if you dont know what youre doing...take it to a shop.
Joined: May 2002
Posts: 7,230
Likes: 0
From: Los Angeles (Downey), California, US
Rep Power: 0 
2 screws on each side (by the wheels)
2 screws by the trunk part.. (10mm i believe)
2 clips on the bottom (below the trunk of course)
Very easy
2 screws by the trunk part.. (10mm i believe)
2 clips on the bottom (below the trunk of course)
Very easy
Registered!!
iTrader: (6)
Joined: Jan 2003
Posts: 823
Likes: 0
From: detroit, Michigan, US
Rep Power: 0
Quote
[hr]Originally posted by: ak
2 screws on each side (by the wheels)
2 screws by the trunk part.. (10mm i believe)
2 clips on the bottom (below the trunk of course)
Very easy[hr]
[hr]Originally posted by: ak
2 screws on each side (by the wheels)
2 screws by the trunk part.. (10mm i believe)
2 clips on the bottom (below the trunk of course)
Very easy
[hr]
Registered!!
Joined: Jan 2002
Posts: 417
Likes: 0
From: , Other, ZEBRA
Rep Power: 0
Quote
[hr]Originally posted by: jrock2324
Good way of saiding it.[hr]
[hr]Originally posted by: jrock2324
Quote
[hr]Originally posted by: ak
2 screws on each side (by the wheels)
2 screws by the trunk part.. (10mm i believe)
2 clips on the bottom (below the trunk of course)
Very easy[hr]
[hr]Originally posted by: ak
2 screws on each side (by the wheels)
2 screws by the trunk part.. (10mm i believe)
2 clips on the bottom (below the trunk of course)
Very easy
[hr]
[hr]
Thread Starter
ThE FaMiLy SeDaN
iTrader: (21)
Joined: Jul 2002
Posts: 4,221
Likes: 0
From: UCF, Florida, US
Rep Power: 0 thanx everyne im guessing the 2 screws up top are behind those bacl covers... anywyays thanx im gonna do the front and bak myself and then take the sides to a shop for thme to do.
riley
riley
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
GaryFishell
1st - 5th Generation Civic 1973 - 1995
3
Apr 24, 2015 06:49 PM
loquito
General Automotive Discussion
11
Nov 12, 2001 07:24 PM
