Custom Carbin Fiber Peices Made!
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 
Custom Carbin Fiber Peices Made!
I can make carbin fiber peices...If I get enough orders I will make any peice you want.....except Hoods,Trunks and the rear deck....It's already been done...Please only parts that havent been made yet..
this is totaly custom made....I was thinking Like
Center Council (whole Council up to the Cig lighter)
Pillers
Dash Cover
Wiper Crawl
Door window moldings
Exc.......
Let me know.....if your really serious email me
jazell26@hotmail.com
please post in list format.
this is totaly custom made....I was thinking Like
Center Council (whole Council up to the Cig lighter)
Pillers
Dash Cover
Wiper Crawl
Door window moldings
Exc.......
Let me know.....if your really serious email me
jazell26@hotmail.com
please post in list format.
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 Sorry about the spelling I was in a rush...talking with the owner of audiobahn.....I'm now able to sell Audiobahn Equip at dealer cost to all of you...cool.....all there new stuff..but anyways I dont have prices yet because I havnt made the molds yet ....so no molds means no not product....dont know how much it will cost me to produce but if you all give me a product to produce that you will buy I'll make it and get back to you on cost......
By the way did you all see my work on the cover of Euro lowrider this mont...I help out with the Stero install
IN APC's Hyundia.....I also can have ROLL CAGES made for $275, bolt ins, 4 points in one day...let me know if your interested in that...
but all of you get back to me on the fiber stuff....
By the way did you all see my work on the cover of Euro lowrider this mont...I help out with the Stero install
IN APC's Hyundia.....I also can have ROLL CAGES made for $275, bolt ins, 4 points in one day...let me know if your interested in that...
but all of you get back to me on the fiber stuff....
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 What about Motor pcs....I need some Idea of what would sell...check out your car inside and out. what would look good carbin fiber.?.....I dont care what it is.....just not some thing already made. I can also make rips of Kits.......would you like the Octain Kit in Carbin Fiber...... the cost would be kinda high though....carbin fiber is not a cheap material to buy....like $50 a yrd....
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 what about front pillers with gage holders, hmmm...o ya, what about the trim ring where the gages are..b4 the clear plastic. I could make it hold like a water temp and air/fuel meter
Initial D!!!!
iTrader: (2)
Joined: Apr 2002
Posts: 2,443
Likes: 0
From: Riverside, California, US
Rep Power: 0 how about the like thing above the licence plate that isnt painted on the dx's, if that stuff is $50 a yard it would be that much
if you make it ill buy it, but im not going to pay way over $100 for it. I think it would sell, especaily for dx owners like me that dont want wast $50-80 to paint it.
Let me know if you make it
if you make it ill buy it, but im not going to pay way over $100 for it. I think it would sell, especaily for dx owners like me that dont want wast $50-80 to paint it.
Let me know if you make it
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 ok thats a start...then that will be the first pc I'll make...I'll make both front and back pc's, any thing else you can think of...let me clear it up...your talking about the part that comes paint on EX models and chrome on 4 drs right?....what about the wiper crawl......the plastic part that spans across the front window under the wipers...? what do you think of that one...
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 knightkids 1...send me your email address and I'll get back to you when it's done..... anyone wanting a centern ps made, email me so i have a record of who to get back to when your Idea is finished...I'll give you all who help out the hook up deal on the first pc's made.
not to show off or anything but here is some of the other things I created...check it out, just so you know I'll real.
My creations while working at AS Kustomz
not to show off or anything but here is some of the other things I created...check it out, just so you know I'll real.
My creations while working at AS Kustomz
Registered!!
Joined: Dec 2001
Posts: 839
Likes: 0
From: North Salt Lake, Utah, US
Rep Power: 0 Spelling correctly would add a tremendous amount of credibility to your endeavor. There are so many fly by night flaky turds out there trying to sell stuff to us already, that just by doing something as easy as spelling correctly or using good grammar would probably give you an exponential advantage over anyone else.
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 << I can make carbin fiber peices...If I get enough orders I will make any peice you want.....except Hoods,Trunks and the rear deck....It's already been done...Please only parts that havent been made yet..
this is totaly custom made....I was thinking Like
Center Council (whole Council up to the Cig lighter)
Pillers
Dash Cover
Wiper Crawl
Door window moldings
Exc.......
Let me know.....if your really serious email me
jazell26@hotmail.com
please post in list format. >>
I am willing to buy whatever you have. If you show me pics of the work that you have done, and pics of what they look like installed, you have your self a customer.
Registered!!
Joined: Jan 2002
Posts: 478
Likes: 0
From: Bel Air, Maryland, US
Rep Power: 0 Kazell, i'll take a carbon version of the chrome piece on the hood and the one oabove the license plate. i also would take the wiper crawl or whatever that is. give me a cost estimate when you're able to do so and pics once they are made. if i like your work, i'll consider pillars(side,between windows) you can email me or pm me. thanks.Maverick's Email Addy
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 Like I said I need about 10 orders of one part.....it takes about 1 week to produce 1 mold of that part.....
after that I can make the fiber pc. in about 2 days because I need to take it to have cleared ( you dont want it dull now) some people do that...but not me....
So keep the Ideas comming....As of now I have
Orders
3 for the part on the front hood and trunk pc above plate
1 center council
1 pillers
1 Gage housing
did i miss anything?
after that I can make the fiber pc. in about 2 days because I need to take it to have cleared ( you dont want it dull now) some people do that...but not me....
So keep the Ideas comming....As of now I have
Orders
3 for the part on the front hood and trunk pc above plate
1 center council
1 pillers
1 Gage housing
did i miss anything?
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 yes I can make the relocation for u but I would need the radio and trim bez, as for the 4dr model, no they dont make the trunk ....or havent seen it yet......and as for the dash board vents....I belive your talking about the vents by the front window.....no I cant just make that pc....I would need to remove the whole dash and it just not worth the trouble.....I would rather make a whole dash cover up to the line that rolls over the gage cluster....including the air bag........I think that would look cool...the dash board and pillers all in carbin fiber or kevlar......blue,yellow....Damn ....thats a lot of colors you can have.....
Registered!!
Joined: Apr 2002
Posts: 44
Likes: 0
From: Camp Pendleton, California, US
Rep Power: 0 Here's my ideas... we need some estimation price info though... If we can all get that... I think we'll all be on board.
The front pillars (driver side w/ 2-3 guage pods) would be awesome. Wiper crawl.... also an awesome idea. Plastic around the speedometer/tach display... thats good to go too. ooh ooh ooh... check it... how about carbon fiber wipers... not the actual blade portion because PIAA makes those... but the black metal portion that they clip into. I wanted to get the PIAA carbon fiber blades but it would look like @$$ without the rest being carbon fiber. I'll think of more.. engine-wise and let you know.
so that makes...
A Pillars with Driver's Side Guage Pods
Wiper Crawl
Guage Console Surround
Wiper Holders
calidohboy@aol.com
The front pillars (driver side w/ 2-3 guage pods) would be awesome. Wiper crawl.... also an awesome idea. Plastic around the speedometer/tach display... thats good to go too. ooh ooh ooh... check it... how about carbon fiber wipers... not the actual blade portion because PIAA makes those... but the black metal portion that they clip into. I wanted to get the PIAA carbon fiber blades but it would look like @$$ without the rest being carbon fiber. I'll think of more.. engine-wise and let you know.
so that makes...
A Pillars with Driver's Side Guage Pods
Wiper Crawl
Guage Console Surround
Wiper Holders
calidohboy@aol.com
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 there you go....I just got of the phone with mark of Jem...well he's the guy who selects the cars for the fast and the ferious movies and he wants us to make him hoods for his hyundia.....hay check this out he has a tiberon given to him by hyundia anyways he's making a kit for it....OOOOMYYYYYYYGOD...this car kicks A@$ .....the new kit he's making for it......I want it for the 2k1 .......you guys will love it.....looks like a supra. ....with bolt inns in it....it spanks the RSX.......race tested....back to back spanked the RSX with pro race drivers running them.....I cant tell you what the kit is fabricated after but it's a hi, hi end car.......I here the hyundia might be the next featured car in the fast in the ferious 2.....he's selecting cars as we speak......I'm trying to get my car in there..... But anyways he's the guy sponcering me on this project to make parts for our 2k1......so I'm waiting for the $3000 bucks it takes to get started.....mean while I show him that people are interested in these pc's for the 2k1....so the more you post the faster things get done...
Keep the Ideas comming.....what do you all think of Kevlar....what would you rather have
carbin fiber or kevlar....?
Keep the Ideas comming.....what do you all think of Kevlar....what would you rather have
carbin fiber or kevlar....?
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 fourkilos.......is that your ride? who did the install?.....thats pretty good glass work......I would have done it a little different but it still kcks butt....I have to show u my installs...
Thread Starter
Registered!!
iTrader: (4)
Joined: Aug 2001
Posts: 2,075
Likes: 0
From: Whitier, California, US
Rep Power: 321 i sure can, but not all after markets are the same size thats why I would like to use the one u have to
make the trim pc for the glassing...i dont want u to have a nasty little gap and have it look like a$$ because that in turn looks bad on me. but for the most part I can make one....did you want it painted, wrapped, or cabin fiber?........by the way If you are planning to have it like the picture what where you going to put in place of the stock factory loc? A monitor?.......also in order to make that pc I would need to have yours or
buy another from honda makeing the cost a little higher since the honda dealer is not cheap .....so what i would need is a core.....if you need a monitor, i sell them as well....AudioBahn ....VERY nice...i have them in my visors myself...I sell all audiobahn equipment....I get the other brands to but...I can sell the audiobahn stuff to you at dealer cost....saveing you $$$$$$$$$$
Anything else?
make the trim pc for the glassing...i dont want u to have a nasty little gap and have it look like a$$ because that in turn looks bad on me. but for the most part I can make one....did you want it painted, wrapped, or cabin fiber?........by the way If you are planning to have it like the picture what where you going to put in place of the stock factory loc? A monitor?.......also in order to make that pc I would need to have yours or
buy another from honda makeing the cost a little higher since the honda dealer is not cheap .....so what i would need is a core.....if you need a monitor, i sell them as well....AudioBahn ....VERY nice...i have them in my visors myself...I sell all audiobahn equipment....I get the other brands to but...I can sell the audiobahn stuff to you at dealer cost....saveing you $$$$$$$$$$
Anything else?
Registered!!
Joined: Feb 2002
Posts: 97
Likes: 0
From: , Other, ZEBRA
Rep Power: 0 I had another idea for where to put the carbon fiber........why not put a thin like 1 inch wide strip where Derek has that neon strip above his glove compartment and then have it continue up each pillar?......... i think that would look real hot
Registered!!
Joined: Feb 2002
Posts: 615
Likes: 0
From: , Georgia, US
Rep Power: 0 If you could get the mold I'd get the whole car in carbon fiber. I'm serious! I know of a guy who has his entire corvette in carbon fiber. As for Kevlar, how is it compared to carbon fiber, quality wise and price wise? Realistically, I'd like to get the door panels in fiber, along with front and rear pillars. Oh, and center console. Basically whatever can be done. I'm not too greedy.
Audiobahn amp, product A4601X, how much would that run me? You can PM me, I've been thinking of stereo upgrade for awhile now.
Audiobahn amp, product A4601X, how much would that run me? You can PM me, I've been thinking of stereo upgrade for awhile now.
