Gearbox Inc. custom parts list (update 3) OPEN FOR BUSINESS!!
Thread Starter
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










Gearbox Inc. custom parts list (update 3) OPEN FOR BUSINESS!!
Okay everyone, I've decided to make a list of products as they are finished.
You can PM me or send paypal to berberoglu@yahoo.com with your shipping info.
1. Replacement SMOKE black windshield washer tubing kits. Tired of yellow, discolored stock tubing that looks like it will fall apart? Clean up your engine bay with a set of sleek, smoke black hose made from hi quality materials. The tubes are cut and labeled to ensure easy installation with the stock connectors. A bonus connector is included where you cut off the stock tube and attach the new one near the washer reservoir.
This kit is slightly larger than stock to allow for the installation of color-matched accord washer nozzles or any other aftermarket LED nozzle where the inlet is not pointed to the side.
Kits are $20 shipped
Quantity available: 2

2. Hyper Coil Ground System. This kit contains a set of four wires to connect and ground the ignition coils to the car chassis. Benefits may include stronger starts and smoother plug firing. There is no stock ground to the valve cover. By providing a ground to the coils, it may be possible to see the benefits listed above. The grounds are hi quality, oxygen free wire in 8 gauge thickness. Ring terminals are gold plated for maximum conductivity. Don't pay hundreds of dollars for similar name-brand kits that do the same thing.
Kits are $35 shipped
Quantity available:
*arctic silver wires: 4
*plasma red wires: 1


3. Power Force Factory Replacement Ground System. The best way to upgrade your vehicle's small, rusty ground wires. This kit includes a larger, heavy duty battery terminal, 4 gauge oxygen free wire, and gold ring terminals. Sandpaper and connector grease is also included for an easy install. Just take off the old wires and replace with these. All three vital grounds are included: battery to chassis, chassis to tranny, and engine block to chassis. All wires are precut for a perfect fit. Detailed installation instructions with pics will be included with every purchase. Upgrade your electrical system today! Other kits sell for well over one hundred dollars and the cables are too long! Remember the shorter the cable, the less resistance and better performance. Don't be mislead by others who tell you to run 10 different wires all over the engine bay. This is not the way to ground at all and can even lead to problems like ground loops, which can reduce performance.
Kits are $50 shipped each
Quantity available:
arctic silver: 2
plasma red: 2
gloss black: 3
You can PM me or send paypal to berberoglu@yahoo.com with your shipping info.
1. Replacement SMOKE black windshield washer tubing kits. Tired of yellow, discolored stock tubing that looks like it will fall apart? Clean up your engine bay with a set of sleek, smoke black hose made from hi quality materials. The tubes are cut and labeled to ensure easy installation with the stock connectors. A bonus connector is included where you cut off the stock tube and attach the new one near the washer reservoir.
This kit is slightly larger than stock to allow for the installation of color-matched accord washer nozzles or any other aftermarket LED nozzle where the inlet is not pointed to the side.
Kits are $20 shipped
Quantity available: 2

2. Hyper Coil Ground System. This kit contains a set of four wires to connect and ground the ignition coils to the car chassis. Benefits may include stronger starts and smoother plug firing. There is no stock ground to the valve cover. By providing a ground to the coils, it may be possible to see the benefits listed above. The grounds are hi quality, oxygen free wire in 8 gauge thickness. Ring terminals are gold plated for maximum conductivity. Don't pay hundreds of dollars for similar name-brand kits that do the same thing.
Kits are $35 shipped
Quantity available:
*arctic silver wires: 4
*plasma red wires: 1


3. Power Force Factory Replacement Ground System. The best way to upgrade your vehicle's small, rusty ground wires. This kit includes a larger, heavy duty battery terminal, 4 gauge oxygen free wire, and gold ring terminals. Sandpaper and connector grease is also included for an easy install. Just take off the old wires and replace with these. All three vital grounds are included: battery to chassis, chassis to tranny, and engine block to chassis. All wires are precut for a perfect fit. Detailed installation instructions with pics will be included with every purchase. Upgrade your electrical system today! Other kits sell for well over one hundred dollars and the cables are too long! Remember the shorter the cable, the less resistance and better performance. Don't be mislead by others who tell you to run 10 different wires all over the engine bay. This is not the way to ground at all and can even lead to problems like ground loops, which can reduce performance.
Kits are $50 shipped each
Quantity available:
arctic silver: 2
plasma red: 2
gloss black: 3
Last edited by gearbox; Feb 19, 2006 at 07:50 PM.
Thread Starter
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










ya not really more hp but better electrical system operation. The factory grounds are too small, and tests have shown that electrical noise is greatly reduced by upgrading them. I am working on a full ground kit to replace stock right now.
I spend way too much time on this website
iTrader: (2)
Joined: Feb 2005
Posts: 667
Likes: 0
From: Poughkeepsie, NY
Rep Power: 0 
do they make a satin silver accord, and do the washer nozzles come pre painted???
and they fit no problem???
cause if they do im getting some washer nozzles and then your tubing kit
Why didn't I know about this sooner??????
and they fit no problem???
cause if they do im getting some washer nozzles and then your tubing kit
Why didn't I know about this sooner??????
Drunken Master-7thgen Ninja
iTrader: (21)
Joined: Jun 2005
Posts: 7,976
Likes: 0
From: georgia
Rep Power: 337 









Originally Posted by LowSky
do they make a satin silver accord, and do the washer nozzles come pre painted???
and they fit no problem???
cause if they do im getting some washer nozzles and then your tubing kit
Why didn't I know about this sooner??????
and they fit no problem???
cause if they do im getting some washer nozzles and then your tubing kit
Why didn't I know about this sooner??????
Thread Starter
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










someone posted a long time ago. Actually I have the same washer nozzles, from an 01+ accord, and they fit great. Pre-painted and all. You have to buy my tubing kit too because the stock tube does not reach the nozzles. 

Thread Starter
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










Okay I am hoping to start selling officially in a week or two. I wanna wait until I have more stuff. Very soon the other factory ground kit should be done and then some LED stuff hopefully.
I spend way too much time on this website
iTrader: (2)
Joined: Feb 2005
Posts: 667
Likes: 0
From: Poughkeepsie, NY
Rep Power: 0 
i just checked the price of those washer nozzels on www.hondaautomotiveparts.com and they are $8.56 each...
i didn't think such a simple part would cost so much but oh well i'm placing the order
i didn't think such a simple part would cost so much but oh well i'm placing the order
Thread Starter
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










alright looks like i am limited to 3 items per month. So once I get the Power Force ground kits done in a few days, I will be taking orders.
Thread Starter
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










PM sent. Guys just so it is clear, all kits will have printed instructions (except the washer tubing)... some are pretty easy but you never know. I'm not a fan of throwing something at you and saying figure it out lol
Last edited by gearbox; Feb 18, 2006 at 09:44 AM.
Vic's almost done... thats sorta depressing...
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (4)
Joined: Jun 2004
Posts: 10,705
Likes: 0
From: Morris,Il
Rep Power: 380 










Originally Posted by Boilermaker1
Where's my kit to put a Hemi in this thing?
Come on man!
Come on man!
haha Oh yea, and
so I have a link to this thread when I have some spare $$$ (god bless tax refunds!) Keep up the good work Gear! 


Wish I had a Turbo 