FS: Firewall Oil distribution block (for turbo or gauge)
Thread Starter
Joined: Jul 2002
Posts: 13,151
Likes: 3
From: Washington DC
Rep Power: 425 
FS: Firewall Oil distribution block (for turbo or gauge)
I machined this a while back planning on hooking up a gauge to it, I then put the gauge in a different way, and I can't use the pressure port on the back of the block because my filter blockoff plate is in the way. So this is of no use to me.
Its machined from a block of aluminum (either 6061 or 7075, can't remember which), the inlet on the side is 1/8 NPT, the first port on the front is for the stock pressure switch (1/8 BSPT) and the second port is for a gauge sensor or a turbo oil line (1/8 NPT). Bolts to the firewall or your choice of location using the 3 holes on top.
I'm sure Greddy would charge about 90 bucks for this, so for 25 shipped, someone can buy it.
Someone can also buy my orange headlight pieces here:
http://www.7thgencivic.com/forums/sh...d.php?t=236518
And my JICs linked in my sig.
Its machined from a block of aluminum (either 6061 or 7075, can't remember which), the inlet on the side is 1/8 NPT, the first port on the front is for the stock pressure switch (1/8 BSPT) and the second port is for a gauge sensor or a turbo oil line (1/8 NPT). Bolts to the firewall or your choice of location using the 3 holes on top.
I'm sure Greddy would charge about 90 bucks for this, so for 25 shipped, someone can buy it.
Someone can also buy my orange headlight pieces here:
http://www.7thgencivic.com/forums/sh...d.php?t=236518
And my JICs linked in my sig.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Xuhme
Cracked block early R18 Overheating
21
Aug 7, 2023 03:40 PM
RIPSAW
Fuel, Oil, Cleaners & Other Maintenance
7
Nov 6, 2015 04:36 AM
lilrob1213
Mechanical Problems/Vehicle Issues and Fix-it Forum
37
Jun 29, 2015 06:45 PM
Supramk3
6th Generation Civic 1996 - 2000
1
Jun 11, 2015 11:13 AM
Supramk3
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
May 11, 2015 07:55 PM
