NEW STUFF ADDED DAILY! - ALPINE - AMP - COMPUTERS - Stock/oem Stuff - Listed w/ pics!
Thread Starter
Registered!!
iTrader: (1)
Joined: Sep 2005
Posts: 197
Likes: 0
From: alabama
Rep Power: 0 
Im looking for 275 for laptop SHIPPED. Its a toshiba sattelite with a Pentium 3 mobile CPU. About 3 years old. Has cracks on hinges, but does not affect the hold position or closing. Small piece of plastic is broke off where usb plugs are and pcmcia doors, but does not affect performance or usability, just cosmetic. Comes with hard drive, but not the side caddy that holds it in. I used some tape for the time being and works fine. Can prob find part on ebay for very cheap if your going to be carrying it around much, otherwise it stays in pretty well standing still. As far as working, the laptop runs great, no problems there, pretty quick too, just mostly cosmetic.
Would be a great laptop for the car for using AEM ECU hookup, etc. Screen is in great condition with no bad pixels. Runs XP great. Has CD/RW and DVD-ROM Combo Drive Also comes with a good working battery and i also have another from the following parts (that makes 2 batteries).
I do have a whole nother unit that is the same that doesnt have the LCD because it was broke by a customer that can be used for parts. If you would like this also, i can work out a deal with you, just PM or email me.
Would be a great laptop for the car for using AEM ECU hookup, etc. Screen is in great condition with no bad pixels. Runs XP great. Has CD/RW and DVD-ROM Combo Drive Also comes with a good working battery and i also have another from the following parts (that makes 2 batteries).
I do have a whole nother unit that is the same that doesnt have the LCD because it was broke by a customer that can be used for parts. If you would like this also, i can work out a deal with you, just PM or email me.
Last edited by 7thGen_pikil; Oct 28, 2005 at 09:13 AM.
Thread Starter
Registered!!
iTrader: (1)
Joined: Sep 2005
Posts: 197
Likes: 0
From: alabama
Rep Power: 0 
Thanks bro, anytime, let me know iof you need anything else!
Yeah, i hope they dont reset all the traders stuff, i was almost as high as my ebay account here, lol. Hopefully soon enough itll be back up!
Yeah, i hope they dont reset all the traders stuff, i was almost as high as my ebay account here, lol. Hopefully soon enough itll be back up!
Thread Starter
Registered!!
iTrader: (1)
Joined: Sep 2005
Posts: 197
Likes: 0
From: alabama
Rep Power: 0 
Thread Starter
Registered!!
iTrader: (1)
Joined: Sep 2005
Posts: 197
Likes: 0
From: alabama
Rep Power: 0 
Water System Specs
Specs on water-cooled system as followed:
Brief, so let me know any questions, please!
No leaks, practicly brand new, i used setup with a peltier a few months back and took pelt off it, so the main water block could use some re-smoothing, but right now works fine on a 2500+ o'cd to 4.1 or so at 100f. Its my third system and basically it sits there and looks sweet... i dont run it at all. I am selling the unit as a while if youd like ill try to name off stuff as it comes to mind..
DANGER DEN:
CPU Block, Chipset Block, Chrome Dual Pass RAD
(both blocks lucite top)
CDROM Resevoir (clear)
Eheim Pump, Tygon Blue UV-Tubing
2x 120cfm Pana-flow 120mm fans (push-pull) on rad
ABIT NFS7 rev2.0 hacked bios for OC
AMD ATHLON 2500+ Mobile, 1.42v (very rare)
sold my really good ram to a friend, had BH-5's...
and i used my OCZ DDR Booster to get to 3.2v on ram
(still have that also)
Custom Lian Li Aluminum brushed case with front aluminum panels and window side
Thermal take 420w PSU
Lian Li thermal Gauges up front
Sunbeam Fan controller (all aluminum in uniform)
Black lights, Black light'd fan and Blue reactive water
80gb sata, cd-rw
Pictures upon request
Brief, so let me know any questions, please!
No leaks, practicly brand new, i used setup with a peltier a few months back and took pelt off it, so the main water block could use some re-smoothing, but right now works fine on a 2500+ o'cd to 4.1 or so at 100f. Its my third system and basically it sits there and looks sweet... i dont run it at all. I am selling the unit as a while if youd like ill try to name off stuff as it comes to mind..
DANGER DEN:
CPU Block, Chipset Block, Chrome Dual Pass RAD
(both blocks lucite top)
CDROM Resevoir (clear)
Eheim Pump, Tygon Blue UV-Tubing
2x 120cfm Pana-flow 120mm fans (push-pull) on rad
ABIT NFS7 rev2.0 hacked bios for OC
AMD ATHLON 2500+ Mobile, 1.42v (very rare)
sold my really good ram to a friend, had BH-5's...
and i used my OCZ DDR Booster to get to 3.2v on ram
(still have that also)
Custom Lian Li Aluminum brushed case with front aluminum panels and window side
Thermal take 420w PSU
Lian Li thermal Gauges up front
Sunbeam Fan controller (all aluminum in uniform)
Black lights, Black light'd fan and Blue reactive water
80gb sata, cd-rw
Pictures upon request
Thread Starter
Registered!!
iTrader: (1)
Joined: Sep 2005
Posts: 197
Likes: 0
From: alabama
Rep Power: 0 
Added:
MEANWELL S-320-12 PSU for PELTIER or anything that needs a 12v source!!
http://www.7thgencivic.com/forums/sh...72#post3533072
MEANWELL S-320-12 PSU for PELTIER or anything that needs a 12v source!!
http://www.7thgencivic.com/forums/sh...72#post3533072





for in STOCK goooooooodnesss