Fs : Get Your Emblems!!! In Stock!!! + Angel Eyes
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 
Originally Posted by Ashhole
yeah. im still deciding where to put mine. thinking about takin the EX badge off and puttin it there
i put mine where the "CIVIC" use to be, since i shaved it.
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 Here's a update where i put mine. I messed up the first time so i had to epoxy it on. its a little tilted but its way better then the last time i did it. bump for some high quality emblems.
PC Tech / Autocrosser
iTrader: (2)
Joined: Apr 2004
Posts: 421
Likes: 0
From: Baton Rouge, LA
Rep Power: 273
Originally Posted by TemjinX2
Here's a update where i put mine. I messed up the first time so i had to epoxy it on. its a little tilted but its way better then the last time i did it. bump for some high quality emblems.
FYI: For anyone putting theirs on, I found the best method was to use a piece of blue painters tape as a bottom guide so the letters wouldn't be mis-leveled, and then I used a paint stirring stick to put a space between each letter. That also gave me a guide for vertical levelness (to a point, i didn't exactly use a level to get them that perfect.
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320
Originally Posted by PrecisnTec
FYI: For anyone putting theirs on, I found the best method was to use a piece of blue painters tape as a bottom guide so the letters wouldn't be mis-leveled, and then I used a paint stirring stick to put a space between each letter. That also gave me a guide for vertical levelness (to a point, i didn't exactly use a level to get them that perfect.
yeah i did the same thing the second time around. i just used masking tape, since it doesn't mess up the paint and its cheap to get. I still have to clean off the excess glue though.
Reppin Stage 7
