COMPLETE nitrous kit AND 16" gunmetal WHEELS. MAKE OFFERS!!!
Thread Starter
He can only tell us white people apart by the tone of our skin.
iTrader: (6)
Joined: Feb 2003
Posts: 1,563
Likes: 0
From: Columbus, Ohio, USA
Rep Power: 0 
COMPLETE nitrous kit AND 16" gunmetal WHEELS. MAKE OFFERS!!!
like the title says its a COMPLETE nitrous express kit. its got everything you need. all the hardwork has been done. all the t fittings, all the hoses, all the small parts are included. read carefully and check out the parts below:
Jets 30, 50, 70
--10LB NEX bottle
--Blow down tube
--Main Power switch
--Purge Switch
--16Ft stainless steal braided line
--Purge kit
--Cyberdyne Fuel Pressure Digital Gauge
--2 WOT Switch
--2 T-Connectors(for fuel line)
--Fuse and connection wiring
--Shark Nozzle
--3" Silicone Pipe With hole
--Nitrous bottle clamps
--customized nitrous bottle bracket
--Instruction Manual
--Original box
basically all the hard fittings are done and still in tact. as you see in the pics...what you see is what you get. this is preset to a 50 shot.
never used the digital gauge, no time to install, I'll throw in the 3" silicone with the hole so you don't need to punch a hole on your silicone TB connector, and 2 T-Connectors, 2 WOT Switch, and the Cyberdyne Fuel Pressure Digital Gauge to go with it too...
I will also send installation instructions on a cd with pictures.
ALL WIRES ARE TAGGED TO TELL YOU WHERE AND HOW TO CONNECT. SIMPLE!!!
ASKING PRICE: $480 picked up, $510 shipped
pics:
ALSO i have a set of 16" gunmetal wheels, Maxxim Oxygenes with 712 kumho ecsta tires with about 75% tread left. they are only a few months old and are in immaculate condition. 4x100 pattern.
ASKING $550 shipped.
if you buy both, i'll let for for $875 shipped (or less...
)
Jets 30, 50, 70
--10LB NEX bottle
--Blow down tube
--Main Power switch
--Purge Switch
--16Ft stainless steal braided line
--Purge kit
--Cyberdyne Fuel Pressure Digital Gauge
--2 WOT Switch
--2 T-Connectors(for fuel line)
--Fuse and connection wiring
--Shark Nozzle
--3" Silicone Pipe With hole
--Nitrous bottle clamps
--customized nitrous bottle bracket
--Instruction Manual
--Original box
basically all the hard fittings are done and still in tact. as you see in the pics...what you see is what you get. this is preset to a 50 shot.
never used the digital gauge, no time to install, I'll throw in the 3" silicone with the hole so you don't need to punch a hole on your silicone TB connector, and 2 T-Connectors, 2 WOT Switch, and the Cyberdyne Fuel Pressure Digital Gauge to go with it too...
I will also send installation instructions on a cd with pictures.
ALL WIRES ARE TAGGED TO TELL YOU WHERE AND HOW TO CONNECT. SIMPLE!!!
ASKING PRICE: $480 picked up, $510 shipped
pics:
ALSO i have a set of 16" gunmetal wheels, Maxxim Oxygenes with 712 kumho ecsta tires with about 75% tread left. they are only a few months old and are in immaculate condition. 4x100 pattern.
ASKING $550 shipped.
if you buy both, i'll let for for $875 shipped (or less...
) Last edited by reytito; Jul 11, 2004 at 09:42 PM.
Balut Eating Champ
iTrader: (29)
Joined: Dec 2003
Posts: 3,568
Likes: 0
From: Las Vegas, NV
Rep Power: 0 ^^^he got it from me...
he got his car clipped, so he is in need of a new rear bumper...
I think I'm gonna buy it back... I miss having that on my ride... I PM'd you...
he got his car clipped, so he is in need of a new rear bumper...
I think I'm gonna buy it back... I miss having that on my ride... I PM'd you...
Last edited by pnoyster2k1cvic; Jul 9, 2004 at 05:25 PM.
Thread Starter
He can only tell us white people apart by the tone of our skin.
iTrader: (6)
Joined: Feb 2003
Posts: 1,563
Likes: 0
From: Columbus, Ohio, USA
Rep Power: 0 yeah i paid $515 for it. good kit. mike knows his stuff and did a good job packing. and like he said, i needa fix a hit and run incident so i gotta sell. someone buy!
aight aight! bump! 
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Bigdaddy198
Archive - Vehicles for Sale/Wanted
0
Apr 30, 2015 08:36 PM
zcwagon
Archive - Wanted Parts (WTB's)
0
Apr 24, 2015 05:18 PM
Cilvic
Parts and Products
3
Nov 15, 2001 04:54 PM
