Rep Power: 0

just purchased a set of axis decades, 18x8 with the front at a et40, and the rear at a et35. also purchased a 215-35-18, tire for all four corners. stock suspension and stock brakes are on the car, but that will change soon.....

ANYONE SEE AN ISSUE OF FITMENT WITH THIS SETUP>>>>>>>
I did my research and have seen this exact setup on the 6g, just wondering if anyone may know a little somethin i may have overlooked.

any help willl be appriciated. M+R= MR

 
Rep Power: 0

well, no response is a good response if you ask me....?

 
Rep Power: 0

WOW, you guys sure are a lively bunch............

Anyway,
the wheels look sick, but need to roll the rear fenders, need to install the suspension too.
probably not gonna lower the rear, having second thoughts about lowering it that much.

how can i only lower the front by .750, or 1" at the very most.
spring compressors?, or how bout an adjustable sleeve like the ebay ones, only not the ebay ones??.

i want a slightly leaned forward look, so the rear needs to stay at stock height and the front end needs to come down only a weee tad, there lassie, soooo...........


pics to be posted in a few....
ttfn

upsdated with night pix (sorry night pix dont do it justice), day pix in am......./day pics up.....still need to drop it!!

 
Rep Power: 0

close thread....movin on to suspension.....