82 Civic L Outer Door Handle
Thread Starter
Registered!!
Joined: Mar 2017
Posts: 2
Likes: 0
Rep Power: 0 
82 Civic L Outer Door Handle
My left outer door handle is broken on my 82 wagon. It snapped right where the linkage hooks up. I cannot find a replacement one anywhere! Ebay, craigslist, junkyards. No one has one. The rear window channel is also broken, so I was hoping to find one of those also. I am getting very frustrated having to get into my car from the passenger side every morning.
I was hoping someone here could help find one or tell me if a door handle from an Accord or some other car would work.
From my understanding, only door handles from 80'-83' sedan or wagon (not hatchbacks) will fit.
I was hoping someone here could help find one or tell me if a door handle from an Accord or some other car would work.
From my understanding, only door handles from 80'-83' sedan or wagon (not hatchbacks) will fit.
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 518 
Re: 82 Civic L Outer Door Handle
Check out www.car-part.com
If you can find a place that has the right car, give a phone call to see if they will sell just the handle you need? Complete doors?
I see the part number 75620-SA0-971 was only used on 82-83 Civic, 3/4/5 door cars.
That's not saying something else might be really close and can be made to work, I only have a part number to go by.
(did not check on window channel)
Seems like a good reason to buy a 3-D printer!
If you can find a place that has the right car, give a phone call to see if they will sell just the handle you need? Complete doors?
I see the part number 75620-SA0-971 was only used on 82-83 Civic, 3/4/5 door cars.
That's not saying something else might be really close and can be made to work, I only have a part number to go by.
(did not check on window channel)
Seems like a good reason to buy a 3-D printer!
