Rep Power: 0

so i started swapping out my girls 03 civic (em2) with the jdm d17a got it all running working fine but i came across a problem that happened before i swapped the motor and their is no pressure at all going to the clutch pedal. i have replaced the clutch master cylinder twice and the slave cylinder as well with the front line that goes to the slave (keep in mind that the parts are from autozone) i bled from the slave and i bench bled the master and still no pressure build up on the pedal??? ive going at this for about 2-3 weeks now and still cant resolve the problem. ive been doing some research and read that you have to use the oem master cylinder from honda??? any help would be appreciated im going crazy trying to figure out what the problem is

 
Rep Power: 210

you have air in the system,

describe the method you are using to bleed the system