Anybody from Canada(toronto Area) who is willing to do my HG job.
Thread Starter
Registered!!
Joined: Mar 2012
Posts: 12
Likes: 0
Rep Power: 0 
Anybody from Canada(toronto Area) who is willing to do my HG job.
From the GTA area and have an 05 sedan civic si (252km) and i definitely think a HG job is needed, with all the coolant loss/overheating/misfiring/overflow on the reservoir tank, annoying bubling sound etc.. I've been to many mechanics and cant seems to have found an honest one, I just had the crankshaft sensor replaced last year of Jan. and he told me to replaced the timing belt as well since it the same type of labor that was needed, paid 600 but didnt come back since as i returned back to him due to the oil leak that i had experienced. He just removed the engine cover and applied some sort of glued to stop the leak. Summer time came and the overheat started to take place and the coolant refill happens from a monthly basis into a weekly routine. Anyway, anyone who is willing to do the work and can charge me reasonable amount, im easy person to work with.
JC
JC
Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
Your pretty close to me but I don't think I'd do this on someone elses car. Good luck finding someone though!
Thread Starter
Registered!!
Joined: Mar 2012
Posts: 12
Likes: 0
Rep Power: 0 Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
All right then ima have to go back to my mechanic and let him check to real culprit of the coolant loss/overheat. In beside, non mechanic people here might have faced the same problem as mine and they gave their energy/time to research the HG job right. Thus, might be interested on making some extra dough on their spare time.
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 519 
Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
I'm only about 700 miles away, and I'd be more than happy to fix it at the shop.
Thread Starter
Registered!!
Joined: Mar 2012
Posts: 12
Likes: 0
Rep Power: 0 Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
nice! as long as my engine wouldnt be exhausted with the HG leak I'll try the 700M trip, i believe you would have to to a full engine rebuild to that point lol.
Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
bad-*** where are you located? ever done the job before? I wouldn't even charge anything. I'm down just to meet a couple people.
Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
Registered!!
Joined: Mar 2011
Posts: 2,499
Likes: 5
Rep Power: 210 Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
on other vehicles and motorcycles i have probably replaced 15+ head gaskets in total
i am near barrie
Thread Starter
Registered!!
Joined: Mar 2012
Posts: 12
Likes: 0
Rep Power: 0 Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
ok guys, i might have save myself some money and hoping that the real cause is just bubble on the system. I just properly burped the rad and actually waited for the fan to turn on before concluding the addition of coolant, the first time around i didnt have any clue that i needed to rev up the engine and didnt have that special funnel tool. So crossing my finger on this as the last time i had an overheating problem was when I traveled to Windsor for 4 hours, but it wasnt like a real overheating as the guage just went 3/4 up on a MCdonald drive thru, eventually i off the engine right away. Hoping after all it just a bubbled and not HG, thanks to who were interested anyway. I'll keep a journal on the coolant level and overheating, day 3 so far and coolant level seems the same.
Registered!!
Joined: Oct 2011
Posts: 156
Likes: 0
From: Brampton, Canada
Rep Power: 179 Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
Another way to get all the air out of the cooling system is to take the rad cap off and let it sit over night. Put the rad cap back on the next morning.
You might want to do a cylinder leak down test before changing your head gasket.
I know a good mechanic in Scarborough. Good Luck.
You might want to do a cylinder leak down test before changing your head gasket.
I know a good mechanic in Scarborough. Good Luck.
Registered!!
Joined: Oct 2009
Posts: 82
Likes: 0
From: Ottawa Canada
Rep Power: 0 Re: Anybody from Canada(toronto Area) who is willing to do my HG job.
your in head gasket denial....lol
I was too, if it fillin your reservoir and you have to add fluid
its prolly head gasket. or worse but HG is most likely
Also you could tell on my cylinder 4 spark plug was white.
When i would took off rad cap I could also smell exaust.
I had mine done at a Honda dealer
also had the timing belt water pump done at same time.
I believe it came to 1500 tax in for everything....in guelph I was on the road with work at the time.
Under the hood looked brand new when they were done.
have since put 40000KM on it ....I still check rad fluid every week..lol
I was too, if it fillin your reservoir and you have to add fluid
its prolly head gasket. or worse but HG is most likely
Also you could tell on my cylinder 4 spark plug was white.
When i would took off rad cap I could also smell exaust.
I had mine done at a Honda dealer
also had the timing belt water pump done at same time.
I believe it came to 1500 tax in for everything....in guelph I was on the road with work at the time.
Under the hood looked brand new when they were done.
have since put 40000KM on it ....I still check rad fluid every week..lol
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Touge
Canada East
0
Aug 11, 2015 10:21 PM
Touge
Ottawa
0
Aug 11, 2015 10:21 PM
Touge
Canada East
0
Jul 28, 2015 09:46 PM
