Rep Power: 0

Does anyone know how hard it is to remove the orange filter from the cluster gauge and the green and orange filter from the main console?

 
Rep Power: 372

do what???

 
Rep Power: 0

there is a filter on the light bulbs that you can remove i heard from many people

 
Rep Power: 308

There is a link in the DIY section

 
Rep Power: 511

that only tells you how to put blue covers on the bulbs. i think he is talking about the green and orange led bulbs over the air recycle, a/c, and rear defrost controls. you cannot put a blue cover over it because it will not show up. i think he wants to know if there is a way to make the green and orange LEDs white so he can put the cover over them and they will work.

 
Rep Power: 0

If you're referring to the orange/red film then you can look at this DIY I made awhile back. I'm not sure what green filter you're talking about since they're all red/orange though. If it's the led's themselves, then like abmerop18 said you cannot put a cover (I tried, they will be too dim). You need to solder new led's of your color choice if you want to change the ac/def/heater buttons. Anyways, hope this helps, btw my DIY was only done on a 2001 (check my ride if you want to see how they turned out).

 
Rep Power: 0

Thanks guys and yeah, i was referring to the green and orange leds

 
Rep Power: 348

filter?