Adjusting headlight aim after clearing

Thread Tools

Search this Thread

Jan 15, 2003

gearbox

Thread Starter

Premium Member

Hey! Look At Me!! I'm a Supporting Member!!

iTrader: (95)

Joined: Sep 2002

Posts: 51,241

Likes: 20

From: NV

Rep Power: 811

Adjusting headlight aim after clearing

I cleared my headlights a while back, but the aim is a little off. The passenger side looks slightly lower than the driver side. How do I adjust them properly? Am I better off having Honda do it with their machine?

Thanks

Jan 15, 2003

Retired Mod

Hey! Look At Me!! I'm a Supporting Member!!

iTrader: (19)

Joined: May 2002

Posts: 7,230

Likes: 0

From: Los Angeles (Downey), California, US

Rep Power: 0

Quote:

Quote
[hr]Originally posted by: gearbox
I cleared my headlights a while back, but the aim is a little off. The passenger side looks slightly lower than the driver side. How do I adjust them properly? Am I better off having Honda do it with their machine?

Thanks[hr]

Please learn to search...

however, i'm nice

here's the answer

Jan 15, 2003

SpeedStars

Registered!!

Joined: Dec 2002

Posts: 281

Likes: 0

From: E-Town, Alberta, Canada

Rep Power: 0

SpeedStars is an unknown quantity at this point

Well you can just adjust them yourself..
if you look down on the headlight them self.. there should be a hex shape screw.. just take the 8mm.. or was it 10mm and turn it right or left to aim it..

I had the same problem, just leave your low beams on.. better if you do it in a dark place so you can see the beam levels.. i used my garage during night time to aim..