Rep Power: 0

how do i get it off?

 
Rep Power: 379

the front bumper take out the clips under the hood holding the grill and use an 8mm socket to get the screws out fromthe fender wells, for the rear remove the 2 10mm bolts after you open the trunk, and then use the 8 mm socket to remove the screws fromt eh rear fender wells. after removal of all hardware the just pop off with a little tug.

 
Rep Power: 272

if its the front bumper there's one bolt on the wheel lining on each side of the fenders then you gotta pop ur hood and take out the radiator cover by taking out the black clips you can use a flathead to take those out. then pull out the fender on each side then pull out from the the center and there you go be careful though cuz you prob have the splash shield connected to the bumper it just has those sam black clips and one screw on each side of the bumper.

 
Rep Power: 319

well its been answered but a simple search can solve the question...hell its in our DIY section

 
Rep Power: 452

locked. Asked and answered plenty of times. So search.

BTW, this is the third thread I have closed of yours. Please do some searching before you post next time. There is a search button at the top of the screen. If you type in what your looking for, you will be tooken to hundreds of threads related to that topic. Some may not be related, but alot will. And 9 times out of 10 you will find what your looking for.