Rep Power: 0

can anyone help me on how to change the cabin fliter? thnx

 
Rep Power: 0

Im not a big help, but since no one is answering, I thought someone said it was behind the glove box?

 
Rep Power: 0

Howdy Civic X3

Go here -----> http://www.micronair.com/

Click on Product Finder. On the drop down box that appears, click and pick North America (if indeed that is where you are)

Next you will enter: Vechicle Year

Next you enter: Vehicle make

Next Enter: Vechicle Model

You will be presented with the Installation Guide with pictures for you Car.

VERY EASY I did this on my 2002 Civic a few weeks ago, took nearly 3 mins (not including the time it took to open the box and take the plastic off the filters). Guys or gals with smaller hands, will have an easier time putting the glove box tabs back in place, but it's not a big deal and just takes closing the boc part way to get them back in and you're done. If I can get my meat hooks in there, anyone can.

 
Rep Power: 338

it's in the owners manual!
basically, remove glove box at 2 points and you'll see it.

 
Rep Power: 320

basically unlack the two screws holding each side of the glove box. glove box pops out. Take black filter frame out. Move second one to the left and the second will pop out. Then reverse. Easy, takes 5min

 
Rep Power: 317

I need to replace mine, I been to damn lazy sense it doesnt affect performance of the car..

 
Rep Power: 0

o thnx for all the input..

 
Rep Power: 0

It will affect a/c. I changed mine for the first time a couple of weeks ago and felt a huge difference in temp.

 
Rep Power: 334

same here. and if you like in or pass through industrial areas, the filters carry around the smells from these areas so it's good to change them out once in a while


here's an earlier post, with all kinds of info plus my pics
http://www.7thgencivic.com/forums/sh...bin+air+filter