Hellllllllllllppppppppppp
Thread Starter
Premium Member
Joined: Feb 2005
Posts: 93
Likes: 0
Rep Power: 258 
Hellllllllllllppppppppppp What's up everyone. Got a quick question. I recently put a bodykit on my car and I was wondering what's the best way to attach the mesh to the cut outs? I know I should have done it before it went on the car and got painted but I didn't have time before I had to get it to paint. So what are my options now on how to do it? Thanks for taking the time to read this... 
Last edited by blue2k2ex; Feb 26, 2005 at 09:22 AM. Reason: NO replies
up-up-down-down-left-right-left-right-b-a-b-a-start
iTrader: (20)
Joined: May 2002
Posts: 7,785
Likes: 0
From: London, Ontario, Canada
Rep Power: 370 
You have to take the bumper off and install it from behind.
If you have a fibreglass kit, bend the mesh over and use bondo or some **** to get it to stay.
If you have a fibreglass kit, bend the mesh over and use bondo or some **** to get it to stay.
Registered!!
Joined: Feb 2005
Posts: 83
Likes: 0
Rep Power: 0 Your going to have to take off the front bumper. Pick up some touch up paint of they type you just had your car painted, you might needed it. Go to Home Depot and in ther adheasive section you should be able to find some plastic fusion or some adheasive of similar type. Look for something thick and fast setting 30 min or less should do the trick.
