1/4 mile times
Originally Posted by Albaniancivics
i took my brothers car down at the track and i ran a 15.1 with an si completely stock and a really bad tranny. it grinds 2nd and 3rd.i hate it
And twinkle, lots of civics go waaaaaaay faster then 13.0 haha. There is a guy here at the air force base with a b20/vtec, sleeved, forged rods, forged pistons, worked head, tranny and a cick *** cluth, he lays down like 503whp on 32psi if i remember right. He breaks lots of axles and spins his 24in slicks through our whole eightmile track and still manages a 7.0. That car ****in rips
Its hard to get a non-forced induction civic with origional drivetrain into the 14's even, and honestly unless that 94 4dr civic has a different motor in it, even with a 75 shot you are not running 13's or low 14's.
And a stock si is never going to run a low 15 considering a profession driver running an open t-body could only run a mid 15 at best with a perfect tranny and motor.
A buddy of mine had an 02 si, with a injen CAI, light wheels and tires and a 75 shot he ran a 14.8.
I personally had an 02 si with a CAI, I ran a 15.87 with a .547 off the line, mighta been faster without the 18 inch wheels.
Lets only post serious runs in this thread.
Ive built em, Ive ran em, and I work for em.
And a stock si is never going to run a low 15 considering a profession driver running an open t-body could only run a mid 15 at best with a perfect tranny and motor.
A buddy of mine had an 02 si, with a injen CAI, light wheels and tires and a 75 shot he ran a 14.8.
I personally had an 02 si with a CAI, I ran a 15.87 with a .547 off the line, mighta been faster without the 18 inch wheels.
Lets only post serious runs in this thread.
Ive built em, Ive ran em, and I work for em.
Originally Posted by Wadely
Its hard to get a non-forced induction civic with origional drivetrain into the 14's even, and honestly unless that 94 4dr civic has a different motor in it, even with a 75 shot you are not running 13's or low 14's.
Originally Posted by Tayler
And soon to come, stage 3 crower cams, skunk2 IM, crower valvetrain and 75wet shot. I should be good for mid 13's or better, NONVTEC ALL MOTA in my 94 4dr

Nice cam choice, I've heard nothing but good about them from everyone who uses them.
What lift will they be set out?
Originally Posted by TypeR
Thats big
Nice cam choice, I've heard nothing but good about them from everyone who uses them.
What lift will they be set out?
Nice cam choice, I've heard nothing but good about them from everyone who uses them.
What lift will they be set out?
Tayler
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
CarStuff
Safety/Security Items - SRS, Keys, Immobilizer, airbags, ABS
6
Dec 6, 2020 12:52 PM
mattdoc
Mechanical Problems/Vehicle Issues and Fix-it Forum
9
Mar 14, 2017 12:10 PM






