Rep Power: 0

Okay here are the functions of the two screws on the TYCs thanks to Impulse
Left screw = Up/Down
Right screw = Right/Left

Passenger TYCs

Right screw = up/down
Left screw = right/left

But, my question is this looking at the front of the assembly (like you were looking at the front of the car) or the rear? (where the bulbs go in)

 
Rep Power: 448

**TO MOVE BEAM UP on the DRIVER-SIDE**
turn the outer(lower) screw counter-clock-wise

**TO MOVE BEAM UP on the PASSENGER-SIDE**
turn the outer(lower) screw counter-clock-wise

**TO MOVE BEAM TO THE RIGHT (towards the plate) on the DRIVER-SIDE**
turn the inner(upper) screw clock-wise

**TO MOVE BEAM TO THE LEFT (towards the plate) on the PASSENGER-SIDE**
turn the inner(upper) screw clock-wise

 
Rep Power: 434

looking at it from the back (or from where teh bulbs go in)

 
Rep Power: 0

mine is from looking at the actual screws...