who has ebay fog lights?
u could technically wire them to a relay so when ur lights are on period they also turn on then u need to switch to mess with....personally on some cars they look good i dont think ill be getting a set though
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 1,143
Likes: 4
From: Fort Oglethorpe
Rep Power: 315 
Originally posted by fine02civicgurl
that freaking site still doesnt work
that freaking site still doesnt work
http://www.robearracing.com/pd_honda..._01_up_oem.cfm
One more thing the oem fogs turn off when you turn on your high beams. The ebay brand stays on even if you have your high beams on. The install process isnt that hard at all, just be carefull when cutting the bumper. You can also go to honda and ask them for the instruction on installing the oem fogs.
Jeff
Jeff
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 1,143
Likes: 4
From: Fort Oglethorpe
Rep Power: 315 You can download the instructions for either the replica lights or the oem honda lights from my site.
OEM Replica Foglight Instructions
OEM Honda Foglight Instructions
Keep in mind that the replica lights were made for UK models with right hand drive.
OEM Replica Foglight Instructions
OEM Honda Foglight Instructions
Keep in mind that the replica lights were made for UK models with right hand drive.
Yes they are for the right hand drive model cars but if you run the wires on the left hand side it fits just fine. Also their is another difference between the oem fogs and the ebay fogs. The oem fogs have a metal shield around the lights which keep the beam of light going straight. The ebay fogs do not have this metal shield making the beam of light shoot out towards the front of the car and also to the side. Keep in mind that when you recieve the ebay fogs they say on them not dot approved and for off road use only.
Jeff
Jeff
I have "ebay foglights". They're oem replicas by some company (I forgot the name, but it's on the lens of both lights), I got for $70 shipped (BuyItNow option) but not foreign like bellz's.
On for about 2 years now, no cracks just small dots from road debris. Owners who cracked theirs (oem or not)probably kicked the lens or ran over an animal or something. The lens is as thick as the windshield glass.
I don't know squat about electrical wiring bulltcrap so I went and got it installed at my favourite ICE shop near where I work.
PS. I told them to put the button in one of the slots next to the powerwindows switches, above the hidden coin tray and below the driver's side vent. Some buttons fit there, some buttons fit in the center console. I have a 2002 center console in my 2001 coupe, but the little slot in the console is covered by my cdchanger receiver.
On for about 2 years now, no cracks just small dots from road debris. Owners who cracked theirs (oem or not)probably kicked the lens or ran over an animal or something. The lens is as thick as the windshield glass.
I don't know squat about electrical wiring bulltcrap so I went and got it installed at my favourite ICE shop near where I work.
PS. I told them to put the button in one of the slots next to the powerwindows switches, above the hidden coin tray and below the driver's side vent. Some buttons fit there, some buttons fit in the center console. I have a 2002 center console in my 2001 coupe, but the little slot in the console is covered by my cdchanger receiver.
Last edited by XxSoVeReiGNxX; Jan 4, 2004 at 12:25 PM.
Originally posted by fine02civicgurl
that freaking site still doesnt work
that freaking site still doesnt work
Thanks for your support!
hey as far as i KNOW im the only one WHOSE wired the fog lights up directly....
I hard wired them BECAUSE i like to have JUST the FOGs on at dusk..
if ne one wants to know what wires and how.. PM ME.
I hard wired them BECAUSE i like to have JUST the FOGs on at dusk..
if ne one wants to know what wires and how.. PM ME.
Originally posted by fine02civicgurl
i dont know what the crap yall are talking about
i dont know what the crap yall are talking about
WHAT IM TALKING ABOUT its wiring them up so u dont NEED ANY LIGHTS ON to turn the fogs on .
Originally posted by FALKEN
thats how mine are
thats how mine are
I have a question:
i have looked around and nothing!
i have a 2002 civic ex and i just got the fog lights from Robear Racing - which is for the 2001 civcs - i orderer the switch for the 2002 civic ex,
the switch are different and the wire harness is different - how do i make them work?
help please,
thank you
one more thing - the fog lights did not come with any templates to cut out the plastic on the bumper, does any one have one?
thank you.
i have looked around and nothing!
i have a 2002 civic ex and i just got the fog lights from Robear Racing - which is for the 2001 civcs - i orderer the switch for the 2002 civic ex,
the switch are different and the wire harness is different - how do i make them work?
help please,
thank you
one more thing - the fog lights did not come with any templates to cut out the plastic on the bumper, does any one have one?
thank you.
Registered!!
Joined: Dec 2003
Posts: 14
Likes: 0
From: Evansville, Indiana
Rep Power: 0 wiring
Hello
Send me your email address and I'll send you file
showing what wire from current switch goes to what
pin on your new factory switch. Cant help with template
as I couldnt find one to go by either.
Sam
Send me your email address and I'll send you file
showing what wire from current switch goes to what
pin on your new factory switch. Cant help with template
as I couldnt find one to go by either.
Sam
Registered!!
Joined: Feb 2003
Posts: 226
Likes: 0
From: Toronto, Ontario, Canada
Rep Power: 0 I bought the eBay fogs and one of them cracked the same day I put it on. The other one cracked a month later. I fooled those guys at Honda into thinking that they were OEM and under waranty, so they changed both of them for free. So now I have OEM housing, and replica wiring. And there is a huge difference in the housing, beam pattern, reflector, and most importantly, the glas on them is much stronger (although after a year one of the OEM housings brock too)
I'm definetly gonna change them to plastiglas
I'm definetly gonna change them to plastiglas
Registered!!
Joined: Dec 2003
Posts: 50
Likes: 0
From: San Francisco Bay Area
Rep Power: 0 Originally posted by Kape
I fooled those guys at Honda into thinking that they were OEM and under waranty, so they changed both of them for free.
I fooled those guys at Honda into thinking that they were OEM and under waranty, so they changed both of them for free.
Registered!!
Joined: May 2001
Posts: 1,206
Likes: 0
From: Vancouver, British Columbia, Canada
Rep Power: 0 hey finally installed mine the depo // fairly straight forward install although i have no encountered an odd problem...perhaps someone can shed some light.
problem is the harness i received had 9006 connectors at the end instead of connectors for the h11 bulbs...
fogs work perfectly, however now that everything is plugged in properly the actual fan that blows air through my vents does not work? the switches obviously still respond because i still get hot air if i turn the temp to hot the fan just doesn't blow. and if i'm in defrost mode and turn on the fan switch the ac light will automatically come on like it's supposed to, so everything is working except it's not actually blowing air out.
removed the fog light harness from the fuse box (which should theoretically revert everything to stock functionality) however the fan still doesn't work, anyone know if the wiring is somehow tied into the fan? i'm thinking this harness was not the proper harness since it had 9006 connectors..however the switch is a 2001 switch and the fogs do work so the wiring seems good.
i'm losing my mind trying to troubleshoot this...perhaps another brain can figure out my situation.
problem is the harness i received had 9006 connectors at the end instead of connectors for the h11 bulbs...
fogs work perfectly, however now that everything is plugged in properly the actual fan that blows air through my vents does not work? the switches obviously still respond because i still get hot air if i turn the temp to hot the fan just doesn't blow. and if i'm in defrost mode and turn on the fan switch the ac light will automatically come on like it's supposed to, so everything is working except it's not actually blowing air out.
removed the fog light harness from the fuse box (which should theoretically revert everything to stock functionality) however the fan still doesn't work, anyone know if the wiring is somehow tied into the fan? i'm thinking this harness was not the proper harness since it had 9006 connectors..however the switch is a 2001 switch and the fogs do work so the wiring seems good.
i'm losing my mind trying to troubleshoot this...perhaps another brain can figure out my situation.
The Beez Kneez
iTrader: (15)
Joined: Aug 2003
Posts: 3,759
Likes: 0
From: Und3Rgr0unD
Rep Power: 314
Originally Posted by XxSoVeReiGNxX
******* hell. I can only have mine on when I switch on the running lights or the when headlights are on. But if either of those 2 are on, I can switch my fog lights on and off. I just have the traditional way I guess.
thats how i did mine 
