How do you center the steering wheel?
#1
DIY King
Thread Starter
iTrader: (61)
Join Date: Apr 2001
Location: Shrewsbury, Massachusetts, US
Age: 47
Posts: 11,469
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 394 How do you center the steering wheel?
Steering wheel centering. That's what I'm after. Anyone have a clue how to get started? What do I disassemble? Anyone taken out their airbag before? Maybe someone with an aftermarket steering wheel knows the answer?
#7
Registered!!
iTrader: (4)
Join Date: Apr 2001
Location: Houston, Texas, US
Age: 43
Posts: 6,995
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 350 cant you just remove it and center it? I remember on my old Honda that the steering wheel could be romved and placed correctly on the hub since an alignment wasnt needed. NOt sure if the Civics respond in the same way. Were you hit?
#8
DIY King
Thread Starter
iTrader: (61)
Join Date: Apr 2001
Location: Shrewsbury, Massachusetts, US
Age: 47
Posts: 11,469
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 394 Originally posted by FALKEN
anybody else have something informative to add besides telling him to align the car lease:
anybody else have something informative to add besides telling him to align the car lease:
Originally posted by RedDragon333
cant you just remove it and center it? I remember on my old Honda that the steering wheel could be romved and placed correctly on the hub since an alignment wasnt needed. NOt sure if the Civics respond in the same way. Were you hit?
cant you just remove it and center it? I remember on my old Honda that the steering wheel could be romved and placed correctly on the hub since an alignment wasnt needed. NOt sure if the Civics respond in the same way. Were you hit?
Here's the whole story so that nobody else tells me to get an alignment... I got into a frontal accident a long time ago when the car was practically stock. The bodyshop fixed the damage and they did an alignment. Everything with the suspension was fine.
Then I got into another frontal accident. This time with my new wheels. I only hit the wheels on a low curb and there was no visible damage to the car. However, after a while I noticed... The front camber was was off. One wheel was negative, one wheel was positive. I dented the rims. One of the spokes on the rims cracked in half. The steering wheel shook and the car pulled slightly to the left.
I then rotated my tires/wheels. No more vibration up front. That means the wheels are off-balanced (the ones that were up front). I then changed out my shocks for brand new ones. This solved the camber issue (almost entirely). Now the left side is perfect camber and the right side is slightly negative. Way less than before though.
Anyway... What I think happened is that after my first accident the suspension was pretty screwed up and they didn't replace anything. All they did was an alignment and they centered the steering wheel. Now that I partially fixed my suspension up front the steering wheel is crooked again. That's why I need to know how to center it.
The slight negative camber on the right side is probably due to the second accident with the curb. The front lower control arm is probably bent. I'll be replacing both of those control arms with the Type-R forged aluminum ones anyway... That should fix it. If not, then I'll be getting coilovers with camber plates up front later. Adjusting the camber should fix things for sure and for positive.
Anyway... Anyone know the answer to my original question? I'll write up a DIY when I do this when I know how to start. If nobody comes forth, then I'll start on it anyway. It shouldn't be too tough.
#9
Registered!!
Join Date: May 2003
Location: Florida
Age: 72
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Be a little careful in what you do. The problem you have could be caused by the frame being off and you might have steering axis inclination problems. This could only be checked on an alignment machine. HOWEVER, if all you want to do is center the steering wheel, you could loosen both tie rod ends and turn them each the same number of turns in different directions, do one or two turns and then drive the car on a level surface to see if you are turning them the right direction. Continue until you have the wheel straight. It is important to turn them exactly the same number of turns so as to not screw up your toe settings. If you need more help let me know?
Jim
Jim
Last edited by Alignment Man; 05-13-2003 at 05:37 PM.
#10
Registered!!
Join Date: Feb 2002
Location: Toronto, Ontario, Canada
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I asked my buddy who dirves lifted trucks so his suspension is always messed up.
Sorry I don't know the right word but- If your alignment is fine check the bar that's attached to your pitman arm. You maybe through that off. The bolt that attaches those two components has a threaded rod that adjusts. Tighten it and your steering wheel will be straight.
This obviously might not be the problem and you'll have to look over all the suspension components. Hope that helps
Sorry I don't know the right word but- If your alignment is fine check the bar that's attached to your pitman arm. You maybe through that off. The bolt that attaches those two components has a threaded rod that adjusts. Tighten it and your steering wheel will be straight.
This obviously might not be the problem and you'll have to look over all the suspension components. Hope that helps
#11
Autocross Junky
Hey! Look At Me!! I'm a Supporting Member!!
Join Date: Oct 2002
Location: Las Vegas, Nevada, US
Age: 45
Posts: 7,211
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 356 you do not take the wheel off to center it. it is adjusted by adjusting the steering rack. take it to an alignment shop and tell them the steering wheel is off center, and they will adjust the end links on the steering rack to center it.
#13
DIY King
Thread Starter
iTrader: (61)
Join Date: Apr 2001
Location: Shrewsbury, Massachusetts, US
Age: 47
Posts: 11,469
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 394 Originally posted by Alignment Man
Be a little careful in what you do. The problem you have could be caused by the frame being off and you might have steering axis inclination problems. This could only be checked on an alignment machine. HOWEVER, if all you want to do is center the steering wheel, you could loosen both tie rod ends and turn them each the same number of turns in different directions, do one or two turns and then drive the car on a level surface to see if you are turning them the right direction. Continue until you have the wheel straight. It is important to turn them exactly the same number of turns so as to not screw up your toe settings. If you need more help let me know?
Jim
Be a little careful in what you do. The problem you have could be caused by the frame being off and you might have steering axis inclination problems. This could only be checked on an alignment machine. HOWEVER, if all you want to do is center the steering wheel, you could loosen both tie rod ends and turn them each the same number of turns in different directions, do one or two turns and then drive the car on a level surface to see if you are turning them the right direction. Continue until you have the wheel straight. It is important to turn them exactly the same number of turns so as to not screw up your toe settings. If you need more help let me know?
Jim
Originally posted by greg2k1
I asked my buddy who dirves lifted trucks so his suspension is always messed up.
Sorry I don't know the right word but- If your alignment is fine check the bar that's attached to your pitman arm. You maybe through that off. The bolt that attaches those two components has a threaded rod that adjusts. Tighten it and your steering wheel will be straight.
This obviously might not be the problem and you'll have to look over all the suspension components. Hope that helps
I asked my buddy who dirves lifted trucks so his suspension is always messed up.
Sorry I don't know the right word but- If your alignment is fine check the bar that's attached to your pitman arm. You maybe through that off. The bolt that attaches those two components has a threaded rod that adjusts. Tighten it and your steering wheel will be straight.
This obviously might not be the problem and you'll have to look over all the suspension components. Hope that helps
Originally posted by Zzyzx
you do not take the wheel off to center it. it is adjusted by adjusting the steering rack. take it to an alignment shop and tell them the steering wheel is off center, and they will adjust the end links on the steering rack to center it.
you do not take the wheel off to center it. it is adjusted by adjusting the steering rack. take it to an alignment shop and tell them the steering wheel is off center, and they will adjust the end links on the steering rack to center it.
#14
MmmMMm.. I smell boost!
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (5)
Join Date: Sep 2002
Location: Strathroy/London, Ontario
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 278 I got into a little accident a it damaged my lower control arm.. After I got it replaced my steering wheel has been a little bit off balance so I'd like to figure out how to fix this also!
#15
Autocross Junky
Hey! Look At Me!! I'm a Supporting Member!!
Join Date: Oct 2002
Location: Las Vegas, Nevada, US
Age: 45
Posts: 7,211
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 356 Let me correct my self, they are not endlinks, but is the only word I could think of to discribe them. Basisally its the part of the steering rack that adjusts toe, you adjust them so that the steering wheel is strait, and Toe is correct. thats why I say take it to an alignment shop.
if the steering wheel is mis-aligned then it means that the guy that did the alignment last didnt bother to center the wheel first. You need to center the wheel, and then adjust the toe around that center point.
Its not something I would want to do my self.
if the steering wheel is mis-aligned then it means that the guy that did the alignment last didnt bother to center the wheel first. You need to center the wheel, and then adjust the toe around that center point.
Its not something I would want to do my self.
Last edited by Zzyzx; 05-13-2003 at 07:07 PM.
#16
Registered!!
Join Date: Aug 2002
Location: Tallahassee, Florida, US
Age: 49
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
you do not take the wheel off to center it. it is adjusted by adjusting the steering rack. take it to an alignment shop and tell them the steering wheel is off center, and they will adjust the end links on the steering rack to center it.
Hope you can geet it for free, and good luck
#18
DIY King
Thread Starter
iTrader: (61)
Join Date: Apr 2001
Location: Shrewsbury, Massachusetts, US
Age: 47
Posts: 11,469
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 394 Originally posted by hangoooknamja
U need to fix your suspension.... like if u have stock shocks.... change them and your alignment will go back. assuming u droppped your car
U need to fix your suspension.... like if u have stock shocks.... change them and your alignment will go back. assuming u droppped your car
#19
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (3)
Join Date: Aug 2002
Location: NJ
Age: 41
Posts: 4,255
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Not that it really helps, but I know that on my previous car, it was possible to have a perfect alignment and the steering wheel be off. If that is the case, I'm not too sure it's a job you would want to do yourself. I personally wouldn't want to mess with the airbags or anything. But on my old car, to fix it, you needed to make sure the wheels are straight, remove the bolts that hold the airbags onto the steering wheel (from the steering column), disconnect and remove the airbag module, use a steering wheel puller (the actual name of the tool), pull off the steering wheel from the steering shaft, make sure it's aligned and then put it back on in the reverse order. That was for a Nissan though.
#20
Registered!!
iTrader: (1)
Join Date: Mar 2002
Location: St. Pete Beach, FL, Florida, US
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Most steering wheels can't just be pulled off and put back on straight because most have a "key slot" that pervents you from doing this. Plus if you are able to postion the wheel the way you want you might screw up the turn signal canceling switch. Which means that possibly when you have your right signal on it might click off with just a slight movement of the wheel and the left side may never cancel.
If a car is properly aligned the steering wheel should be straight.
If a car is properly aligned the steering wheel should be straight.
#21
Registered!!
Join Date: Jun 2002
Location: Toronto, Ontario, Canada
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 if u're really keen on taking your steering wheel off to do some adjusting, and I think that's a REALLY bad idea, make sure you at least yank the battery first so you don't accidentally fire the SRS!
#23
DIY King
Thread Starter
iTrader: (61)
Join Date: Apr 2001
Location: Shrewsbury, Massachusetts, US
Age: 47
Posts: 11,469
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 394 It's done! See this thread for details: HELP: Adjusting Front Toe
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
OptimisticWay
7th Generation Civic 2001 - 2005
46
10-15-2015 02:16 PM
califcamper
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
07-21-2015 10:34 PM
BootyDo
Wheels, Tires & Brakes Modifications
2
07-07-2015 06:06 AM