Nitrous Express Help
 

Well I've read the DIY on here and looked at the instructions but they don't help me at all. The DIY picture on the bottle shows 2 blue connectors each for the gauge and one for the bottle heater pressure sensor or whatever it is. My kit came with 2 as well, but one had 2 holes so here is how I mounted it:http://www.7thgencivic.com/memberrid...33PICT0447.JPG

Will this work? I used this one because it had 2 holes and no plugs so i figured it was to mount both things there. Will this work and if not, what should I have done correctly. Thanks

correctamundo