K20 Swap Problems!!!! Please Help!!!
 

we juss finished my type s swap into my 02 civic ex coupe and everything is fine, i got spark, fuel pump works, voltage everywhere but for some reason the fuel will go to the fuel rail and juss stop there, for some reason my injectors wont open up, and we tested the injectors and they are good. We also have the type s key, ignition, and ecu so we dont have to re flash anything. does any one know what the problem could be/????? we been tryin to find out for the past week. basically there is no fuel going to the motor, it cranks and everything but the injectors wont open up. ANY HELP WOULD BE HELPFUL THANKS. :hithead:

call import options in hayward california i do not know the nuber off had but they speciallize in engine swaps only into hondas it's either hayward or san leandro

i will try to find the number for you

Gotta be a harness issue, or the ecu isn't sending the signal to the injectors...

did you have hasport make your harness

thanks alot scorpion, i really need some help with this. we didnt have hasport do the harnest but we had the diagram to do it. the only problem is the injectors that wont open to give fuel.

sounds like a wiring issue.. i'd double check that

almost deffiently a wiring issue, just go back and check ALL your wiring, maybe try giving hasport a call maybe they can help you out.

USE THE HASPORT HARNESS! I had the same problem with my car when i tryed to do my harness myself. Hasport knows what they're doin it's worth the cash.

Double check all of your wiring. I have had no problems of this sort, and I did my harness.