95 ej/ex w/ b16a3 swap 4 Attachment(s) Just got it the other day, its my first Honda and so far its a pretty sweet car . 95 ex lowered front and rear traction bars b16a3 swap headers 4-1 P28 ECU CAI Nitto's all around thats all it had for now but that wont be all looking to do some SKUNK2, BUDDY CLUB and a few other mods to it nothing to big in the near future but stay tuned b/c this is gonna be a sweet little civic once im done with it. im new to Hondas and anything VTEC really so your input and advise on possible mods and what not is more then welcome thanks |
Re: 95 ej/ex w/ b16a3 swap Welcome to the site! Off to a good start. |
Re: 95 ej/ex w/ b16a3 swap thanks man. yea i have already found some pretty helpful stuff on here |
Re: 95 ej/ex w/ b16a3 swap just got new skunk2 silicone hoses for the radiator and got some Mobile1 5w30 high mileage full synthetic (went with high mileage instead of normal because i have more than 120xxx on the motor) and k&n oil filter (wanted the mobile1 filter but pep boys didnt have it lol) i went with the oil and filter after doing some research on what type would be best for this motor (forums and a couple different sites) so hopefully i get some good results from it ... will let yall know once i do the oil change if i feel a difference or notice anything will post pics when i get the ne hoses and put them on |
Re: 95 ej/ex w/ b16a3 swap new stuff as of lately AEM Dryflow filter Mobile1 full synthetic oil + k&n oil filter SKUNK2 silicone radiator hoses Antenna delete (OEM gonna paint it b4 i put it on) Pioneer head unit w/ Bluetooth/Android connect made a mounting rack for my P28 ECM coming soon.... (if all goes well lol ) raising it up and inch or two so that speed bumps are no longer my nemesis!!!! lol Spec D clear corner lights and fog lights Skunk2 Megapower exhaust around Christmas hopefully Hondata S300 ECM New VTEC solenoid and spool w/ sensor |
Re: 95 ej/ex w/ b16a3 swap you look high enough for bumps, you drive over them diagonally right? ...but I have seen some monster bumps that i havn't tried to get over. |
Re: 95 ej/ex w/ b16a3 swap yea i have speed bumps right out front of my house and the normal ones i can deal with i just gotta go slow and at an angle its those freakishly big hulk/Thing speed bumps they put in some parking lots and apartment complexes that i just avoid and there is some really dumba$$ road construction going on all around my town right now and there "fixed" roads are as bad or worse as the old ones lol so im picking it up mostly for peace of mind so i don't have to worry bout denting or ripping off my headers and exhaust or whatever else because people cant fix damn roads right lol honestly if i lived somewhere where the roads n speed bumps weren't an issue id would leave it right where it is |
Re: 95 ej/ex w/ b16a3 swap How do you like the radiator on that car if i might ask? I know its stupid but i have heard temp drops of over 50deg even on ebay alum rad's |
Re: 95 ej/ex w/ b16a3 swap sorry haven't been on in a while... but that radiator gets the job done just fine its my first n only Honda so far, so i haven't had a full size radiator on one but it keeps it cool when im cruising and when im hauling ass. havent taken a long trip or noting in it yet but the radiator seems to be getting the job done just fine |
Re: 95 ej/ex w/ b16a3 swap 5 Attachment(s) Got some new goodies for the whip !!! cant wait to get them on there. Skunk2 Composite Fuel Rail DOWNSTAR Tuckin Fuel line kit AEM Fuel Pressure Regulator. |
Re: 95 ej/ex w/ b16a3 swap After you put on that new fuel rail and that regulator you burning more or less gas or same thing ? It's looking good those fuel lines make everything look worth it |
All times are GMT -5. The time now is 12:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands