TFMEX ES2 "Build"
 

I have had my ES2 since 2006 when I bought her. 04 EX D17A2 and she is my baby.

Here are some before Pictures of her before I started the mods. I use the stock 5 wide spoke alloys for the winter. But no pics on here of it with the stockies
Attachment 96019
Attachment 96020


After

Attachment 96021
Attachment 96022
Attachment 96023
Attachment 96024
Attachment 96025
Attachment 96026


So Far I have done:
-American racing rims 17x7 wrapped in 215/45/17 Kumho AST. Rims were 150$ tires were 50$ each (cousin works at a tire shop)
-Skunk 2 Pro S II full coil overs (dropped 2.5" in from 2.25 in rear) I dont care what people say I really like these for the price and the ride is actually comfortable)
-RSX 19MM Rear Sway Bar and endlinks
-Neuspeed Front Upper Strut bar
-Revo V2 Short Throw Shifter (w/aluminum Bushings)
-AEM Short Ram Intake
-2.25" Catback Exhaust
-Projector Headlights / OEM Fog Lights with 6K 35w HID Kits
-Type A Front Lip
-Full Sound system Eclipse Head unit 100wawtt Rockford Fosgate sub amp with 2 Alpine 12" subs with custom box in the trunk.

I am still going to be doing some more to it but that's it for the next month or so. :rockon:

Re: TFMEX ES2 "Build"
 

Nice. Love that d18a2. Remember to put more vtec fluid in there

Re: TFMEX ES2 "Build"
 

D18A2? What?!

Anyways, I love your car. This has one of the best stances I've seen on a 7th gen sedan. I love how it sits!
By the way, how does that lip look in person? I'm thinking of getting that one too to prevent scratching the OEM bumper.

Re: TFMEX ES2 "Build"
 

Yes they only made 1 D18 :roflmao:

TYPO!

The lip looks decent. its Polyurethane so its not shiny I will get it painted eventually after I get my skirts. for 50$.... well worth it.

I'm still looking to go LOWER! im a bit nervous only cause im rubbing on the splash guards on deep turns... how can I go lower and not totally remove the splash guards and also not rub on the fender........

I have also been looking at inverted tie rod ends. Is there more than the T1R option out there?

Re: TFMEX ES2 "Build"
 

we were just teasing you btw. great work on the car.

Re: TFMEX ES2 "Build"
 

HAHA no problem at all. I know not everyone is gonna like it and thats ok.

Question for you guys...

I'm still looking to go LOWER! im a bit nervous only cause im rubbing on the splash guards on deep turns... how can I go lower and not totally remove the splash guards and also not rub on the fender........

I have also been looking at inverted tie rod ends. Is there more than the T1R option out there?

Re: TFMEX ES2 "Build"
 

Where did you buy those projectors they look really clean not like the ebay ones

Re: TFMEX ES2 "Build"
 

That look like stock headlight housing with a retro the car looks awesome

Re: TFMEX ES2 "Build"
 

THANKS! Glad some of you like it!!! :cool:

The headlights are actually both ebay AND Retro.

my stock ones were beat. So I ordered some off ebay and had my brother in law put MUCH better projectors in them. Cost me about $350 in total(I didnt pay for labor). I wish I knew what he did or what projectors he got cause they look great. I was away on business when he did it. Took him about a week (hes unemployed / self employed) haha.


I think I am going to sell off the rims / tires in the pics and go back to my stock 5 wide spoke after I recondition them. Then I can go lower and tuck without rubbing or too much camber. They are great wheels but I want less rim and more tire.

Re: TFMEX ES2 "Build"
 

Scratch that last question.... Looks like my parents ordered me a birthday present and it arrived 2 weeks early in the mail :giggle: I bet you can guess what it is... lol

http://img441.imageshack.us/img441/1016/0427021115.jpg

Re: TFMEX ES2 "Build"
 

looks like someone got a new Type A LIP!!!!!!!

Re: TFMEX ES2 "Build"
 

Yup! Looks pretty cool! I won't install it until I get my fogs and coilovers installed, just for ease of getting under the bumper. Oh, and I sprayed it with Armor All protectant which gives it a much darker and shinier black surface.

Re: TFMEX ES2 "Build"
 

^thread jacker....lol

Re: TFMEX ES2 "Build"
 

Heck yeah, this is MY build thread now! Move over TFMEX! :bump:

Re: TFMEX ES2 "Build"
 

:yell: outta my thread! :kick:
:roflmao:

Re: TFMEX ES2 "Build"
 

*fight fight fight*

Re: TFMEX ES2 "Build"
 

NO NO NO Fighting.....

On another note... Washed, Clay barred, and waxed the Vic and my rims yesterday.

Also maxed the drop in the back for a nice tuck and dropped the front another half inch (will drop more tonight).

Rolled the front fenders and cut a small section of the splash guards out to allow a front tuck. I will be re modifying the splash guard to make it fully functional again but its good for now.

Crappy iPhone pic but ill post another when i make the adjustments tonight and I can use a REAL camera.

Attachment 95996

Re: TFMEX ES2 "Build"
 

Finished the final adjustments on the drop all I need is another alignment (thank god for lifetime alignments for $200)

Washed, Clay barred and Waxed (including rims) 3" drop in the rear 3.25+ in the front.

Attachment 95990
Attachment 95991
Attachment 95992
Attachment 95993
Attachment 95994
Attachment 95995

Re: TFMEX ES2 "Build"
 

Nice, love that stance, even more so with the further drop.
I wish I had an alignment shop with that kind of deal :FUU:

Re: TFMEX ES2 "Build"
 

A lot of shops do have it... Town Fair tire, Sullivan Tire, firestone, pepboys etc.

call around. Its a fantastic buy ESP when you have coils like us. I adjust and align, drop align, align want more camber.... go back and align... haha

I have had 4 alignments in 2 months. I got mine at Sullivan Tire and the shop manager used to race and helps me out big time. Very great deal... :rofl:

Now I need side skirts....

Re: TFMEX ES2 "Build"
 

When you installed that lip, did you have to remove the thin rubber strip from the bottom of the bumper? Or does the custom lip just sit in front of that?

Re: TFMEX ES2 "Build"
 

Mine ripped off WAY before I put the lip on so im not sure.... i removed the bumper to put it on as well so I could get the best alignment on it.

All I did was line it up tape it into position with some duct tape and drilled some starter holes then screwed it on. took me maybe 15 minutes.

Re: TFMEX ES2 "Build"
 

From ratings 1(shitty) through 10 (woah)

how would you rate your skunk2 coilovers? Do you feel they are a bang for the buck?

Re: TFMEX ES2 "Build"
 

id give them a 7.5 overall. they arent as bad as everyone says. quality is great in my opinion. I got them for about $700 new (I got a deal).

They ride stiff (thats what I wanted) They are easily adjustable and can be adjusted decently soft for a set of coils. They are on my DD and I enjoy them. If you have the money I hear Progress or Koni with GC's are the "higher quality" setups but for me I couldnt beat the price point. Im also not tracking my car.

Ride comfort=7 (for coils)
adjustability=9 (im dropped almost 3.5 inches)
quality=8 (again, my opinion and I know there are better products out there)
install=10 (super easy)
Durability=??? I have had them for 4 months.... so far so good!

Re: TFMEX ES2 "Build"
 

Just installed electric130's big 3 ground kit. A+ love it. Worth every penny.

GET ONE HERE!!!!!

Re: TFMEX ES2 "Build"
 

wheres the pics of ur new tires man?

Re: TFMEX ES2 "Build"
 

It has been pouring like a MOTHA here in New Hampshire the past 2 days and have another 2 days of shitty weather.

I PROMOSE some nice CLEAN photos when the rain breaks. Im ditching the ebay exhaust on friday (only paid $55) for it and getting a custom one done so prolly this weekend so then I can clean it up and show off the new exhaust too!
:rockon:

Re: TFMEX ES2 "Build"
 

how did you install that lip i was looking at getting it

Re: TFMEX ES2 "Build"
 

Even I could tell you that.
It's really simple, you hold the lip in place with some tape, then drill the provided screws to hold it in place. It's probably easier to do when the bumper is taken off, but you don't have to do that. Also drilling pilot holes will prevent the screws from cracking your bumper if you do a crappy job lining them up.

Re: TFMEX ES2 "Build"
 

meanwhile in california...

Attachment 95911