help with slicks!!!!!!!asap
 

hey guys im in need of slicks n rims asap. i have a 04 ex coupe turbo. i plan on etehr gettin 15 inch slipstreams or 13 in lensos. what size slicks can we fit on our cars wit no probs. and how much hp is pused with thoses. i herd 22 inch slicks are a comine size and i herd if you get slicks that are to big you wont spin em and youl brake an axle and your tranny.. leme know asap!1 need to buy asap! thanks

if you do have 22 inch slicks what are your trap times??

helpme!!!

u know you posted this in 3 differnt sections it seems like and i responded to both.. what gives??


its ahrd to tell you what slick sizes to use..
the the amount of power you push is one factor..
and how you race is another...

you could have a 500hp car and not break a single stock axle.. just depends on how you race it.. if your worried about breaking an axle i wouldnt worry about what size slicks.. i would rather worry about getting stronger axles first

wut size slicks do u run ..what are teh specs? hw much u pushin power wise?

thats 2 u x

i have 3 sets of slicks and 2 different drag radial sets..

i set of 23 on 13in lenso
i set of 24.5 on 13in lenso

and i got another set of 26 no rims yet

this is for me running a k-series motor.. its irrelevant to comapre a D and a K because the motor outputs are different as well as the driver... you got someone who could preload the clutch so they dont break axles versus someone who drops there clutch..

r u stock k 20?

how come not get konig heliums? only like 90 a piece and weights like 11pounds, how come you dont try launching your car as it is now and then think of whatever size tires you need from there, theres a huge difference from doing a good launch and just dropping the clutch, you should only hear acouple chirps on a good launch i think haha

semi built...

i got another motor going in to the car in a few weeks... fully built k24/k20 frank 9:1 compression bossting 20psi...shooting for at least 500hp

nice....bump for u sir