For a Turbo
 

Ok I was talking to a friend about getting a turbo and he told me that i have to get my motor honed (or something like that) cause it isnt naturally turbo is this true and what is (honed)

something you have done when you rebuild an engine to make sure the rings wear in correctly. Its kinda like a criss cross pattern of VERY light scratches in the cyl bore.

welll i learned sumthing new!

You don't need to hone the block unless you're re-ringing it. And just to boost it, you don't need to do this. You need to do this after you blow the rings. Get the compression tested, if it checks out, just boost it and be done.

Thanks guy