Racing Seat and Mounting Bracket Special
 

We have had a number of requests for cloth racing seats. We do have in stock 4 colors and mounting brackets that sit lower than any brackets we have seen to date. We have put together a package including seats, brackets and shipping within the 48 states. We always appreciate feedback and photos as we would like to start a Civic photo page.

We cannot offer matching rear seats in this cloth as it was imported and we have not as of yet found a match in the US. We can always do complete custom interiors in leather, simulated leather, suede inserts, etc. We would be happy to quote according to your needs but would prefer to have a few sets of standard cloth seats installed by forum members first and get feedback on the mounting system and observations, suggestions, etc. The link to the special is below.

http://www.arizenracingsports.com/pa...ROD/7THGEN-SPL

Mark
www.arizenracingsports.com

If you are in the SE CT. area and would like to make an appointment to sit in seats to see how they feel email me and I'll set up an appointment for you.

mark@arizenracingsports.com

links to larger seat pictures:

http://www.arizenracingsports.com/pa...s/Arizen-Blk-C

http://www.arizenracingsports.com/pa.../Arizen-Grey-C

http://www.arizenracingsports.com/pa.../Arizen-Blue-C

I have uploaded some pictures of the mounting system. You can see how the brackets bolt to the floor in the rear and front. You will also see it is almost impossible to design something that would sit lower using the factory holes than these brackets. It's easy to go up, but brackets that sit too high can cause problems.

http://www.arizenracingsports.com/im...01Civic-rr.jpg
http://www.arizenracingsports.com/im...01Civic-fr.jpg

We would appreciate feedback since we purchased the actual floorpan for fabrication. We did our best to allow for carpeting and other factors. The coupe and sedan are slightly different but the slotted holes should accomodate this. There is a slight height difference on the rear "foot" of the factory seat tracks from coupe to sedan so if a shim is needed for one we can make it.

I will see if I can offer any additional incentives to anyone ready to purchase before the end of the weekend. We can offer logos. Normally on the seat they start at $24 each or we can make harness slot logos at no charge.
http://www.arizenracingsports.com/images/CivicLogos.jpg