|
Originally Posted by bhoy here u go |
no i cut the one that holding the stockspring and shave it so the coilover will fit |
Originally Posted by bhoy no i cut the one that holding the stockspring and shave it so the coilover will fit |
sorry, not slammed but lowered... |
Originally Posted by bhoy no i cut the one that holding the stockspring and shave it so the coilover will fit |
Not sure, but if I'm not wrong, that's the front perch. He prolly cut it to be able to drop the car lower. The O ring that goes up or down to lift or drop the car hits the front perch, so some peeps usually cut it to be able to drop it as low as the Coil Over will go. And if I'm not wrong again, the ride quality doesn't change by doing so. "ONE" "Blue" |
Originally Posted by BlueBoyCivic Not sure, but if I'm not wrong, that's the front perch. He prolly cut it to be able to drop the car lower. The O ring that goes up or down to lift or drop the car hits the front perch, so some peeps usually cut it to be able to drop it as low as the Coil Over will go. And if I'm not wrong again, the ride quality doesn't change by doing so. "ONE" "Blue" maybe next time you'll get something a bit better to drop it on. but its your car so... :rockon: |
i just saw what you did to lower your car....your an idiot sorry to say plus u have a newer civic.....straight up cheap ass |
ok...if i can try and figure out wtf that guy is saying is that he cut the front spring perch in order to put the coilover sleeve in more. that is what your told to do with sleeved coilovers. it says in the directions. i have skunk2 coilovers and it says in the directions to cut your spring perch. i didnt but i plan to. and just to stay on topic. BTW i know my lip is ****ed. i dont care http://i9.photobucket.com/albums/a59...em2/moto-2.jpg |
http://premium1.uploadit.org/rijowysock//DSCF0584.JPG http://premium1.uploadit.org/rijowysock//DSCF0590.JPG i ride slammed.. belive it or not i lowered it another half inch all around b4 i parted her out.. no rubbing no scrubbing, just right, if you wanna ride same, buy tein flex riley |
it look nice... |
3 Attachment(s) my new pic... |
|
i always laugh when i look at the people on bags and how HORRIBLE the rear negative camber is...haha... but anywho i love bags and eventually i think i may get them. By the way bhoy (creator of thread whatever your name was?) you should prolly look into a camber kit urself. rear cambers lookin a little bad. nice all around though folks. |
nice but what if you need to give 3-4 peeps a ride? possible? |
Originally Posted by gearbox nice but what if you need to give 3-4 peeps a ride? possible? |
|
|
^nice. when you gonna paint it? |
Never, I think he is selling it. |
i used ground control and koni shucks....... |
|
Originally Posted by eklipz http://i4.photobucket.com/albums/y13...m/99a40a18.jpg http://i4.photobucket.com/albums/y13...m/795ec691.jpg |
1 Attachment(s) y0 minesis lowerest causei took ma suspension straight outda bitch. beat dat f00s! :rockon: http://www.7thgencivic.com/forums/at...id=59670&stc=1 |
me likes the 5 lug and rsx seats |
Originally Posted by bhoy i used ground control and koni shucks....... |
thats called photochopped hawk |
hahhahaah thats photochopped foreall....i got 16' ssr schumacher |
Originally Posted by Hawk y0 minesis lowerest causei took ma suspension straight outda bitch. beat dat f00s! :rockon: |
thats it no more slammed cars here...? |
| All times are GMT -5. The time now is 03:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands