Help Neuspeed X Brace DIY
 

Does every one did the DIY Neuspeed X Brace with pics? or any links? Thanks

here...off the neuspeed site
http://www.neuspeed.com/installation...type=ns_import

does anybody have their personal diy's also

Xbrace DIY
 

Honestly, the X brace install is really easy. If you hold the X brace up to the underneath of your subframe, it becomes pretty much self-explanatory. Jack the car up, jackstand it, support the subframe with another jackstand, remove the 4 bolts and then put them back through the x brace and into the subframe. I installed x-brace + Neuspeed poly front swaybar bushings in about 20-30 mins.

hey guys. if you do not own jackstands, is it possible to to put the front end up on ramps and brace the subframe with the jack from car? i know this may not exactly be safe, but my access to anything bigger than hand tools is very limited in that i live in an apartment away from my family(my dad has this stuff). i know my girlfriend's father has the ramps. thanks.

909edge - are you getting much noise from those bushings?