D2 End Links!
 

I have a rear 22mm JDM Integra DC5 Antiroll bar. I'm worried that the end links will break one day.

I found that that D2 Racing do have the after market endlinks. Anyone using them?

Pictures from my friend's car

http://i28.photobucket.com/albums/c2...y/DSC00311.jpg

http://i28.photobucket.com/albums/c233/Airlesy/arbb.jpg

http://i28.photobucket.com/albums/c2...y/DSC00321.jpg

http://i28.photobucket.com/albums/c2...y/DSC00324.jpg

http://i28.photobucket.com/albums/c2...y/DSC00308.jpg

http://i28.photobucket.com/albums/c2...esy/done18.jpg

Re: D2 End Links!
 

i dont really think you have to worry about the endlinks breaking with the RSX-R rear swaybar. i have the same bar with OEM endlinks and i do quite a few road races with it in the summertime. no problems to date.

i think a lot of people are afraid of the endlinks breaking because Progress had a problem with their rear swaybar that caused our OEM endlinks to snap eventually. i dont think the same goes for the rsx bar.

Re: D2 End Links!
 

Thanks dude. Cause I'm using the 22mm not the rex bar which is 19mm. By the way, next time you jack up your car, help me check your end links, or even better take some pictures. I will be tempted to try the end links from D2 if it helps.

Then again, I know some guys who used the JDM end links and the end links broke off.

BTW, what do you use for the bushing dude?

Re: D2 End Links!
 

Those endlinks in that picture look the same as OEM ones? Unless its just a bit thicker?

Re: D2 End Links!
 

get the dezod endlinks they look much better

Re: D2 End Links!
 

you can always try grey's endlinks from this forum...here's the link... bought mine from him not to long ago but i'm just waiting on my jdm (22mm) sway bar, same as yours...hope it helps

Re: D2 End Links!
 

^^^you can do the greys endlinks or you can search there was a guy on here that made his own and then gave the part #'s for all the parts. i would go that route.

Re: D2 End Links!
 

those pics in the first post are just stock endlinks lol!

Re: D2 End Links!
 

I'm running the Progress rear sway bar which is 22mm and I run stock end links. My 27mm bar that I sometimes run upfront has stock endlinks to. I have never broken a stock endlink before and I track and auto-x cross my car hard most of the time when I am Auto-xing I am usually on 2 to 3 wheels at all times on rare occasions 4 lol! the stock endlinks are more than strong enough to handle all of your needs.

In all honesty you don't need aftermarket endlinks save your money

Re: D2 End Links!
 

im using stock links since 03 with my progress bar. no problems..

Re: D2 End Links!
 

Thats what I said! LOL!