Strut bolt keeps working loose Replaced struts last week, and the p/s top mounting bolt keeps working itself loose. What did I forget to do? |
Re: Strut bolt keeps working loose What did I forget to do? |
Re: Strut bolt keeps working loose
Originally Posted by ezone
(Post 4682935)
Torque it? |
Re: Strut bolt keeps working loose Was the nut reused? Was it supposed to have been replaced? Some are only supposed to be one time use. |
Re: Strut bolt keeps working loose I have taken my front struts off many times and always re use the same bolts. Never had an issue with it not staying tight. You could use a lock nut but you shouldn't have to, it should stay tight without one. |
Re: Strut bolt keeps working loose No, used the new bolts. Looking at it again, the bolt has a hex key attachment in the center. Does this need to be tightened? |
Re: Strut bolt keeps working loose Hex key in the center? Which bolt is it? The crash bolts that attach to the knuckle or the ones on the strut mount? The only one that usually has a hex key in the center is the strut rod which does not get turned. That hex key is used to hold the rod steady while you tighten the nut. |
All times are GMT -5. The time now is 10:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands