Simple alignment advice
 

bought this 01 coupe as a DD

springs etc all OEM

LCA's were shot
pressed in front bushes, rears ok replaced struts,

BJ's meh
tie rod outers, meh

drove around the block to settle

ain't broke out my laser, just lookin,

I have mega front toe
and a good bit of rear camber

I generally prefer 0 and -0.5 on the rear and 1/16 out and -1.5 front on my speed for DD

whats reasonable on a Civic coupe?????


BTW, saw the struts an thought WTF, but, really kinda liking the straight shot steering rack geometry. actually like it a lot

Re: Simple alignment advice
 

0 toe front
+2mm toe in, rear


0*, +/- .75* camber front
-0.75*, +/- .75* camber rear

Caster, 1.5*, +/-1*

Re: Simple alignment advice
 

1.5?????

jeez, most speeds run 3ish stock, mine was shy, but with some hole elongation I hit 3.5
castor

Thanks for the specs brother

Re: Simple alignment advice
 

Those were specs from the book for an 01-02.
Later Civics upped the caster a smidge.