NE1 mind if I lock this and start a new one? It's getting pretty big.

D

You're the boss!
Just post a link before you lock it!
Please :)

over 572 posts. I think it can be locked.

*in before the lock!* :)

Maybe start a new one after the swap is completed? But in the end it's your call

N B4 Da LOQ, F00!! [IMG]i/expressions/face-icon-small-mad.gif[/IMG][IMG]i/expressions/face-icon-small-mad.gif[/IMG][IMG]i/expressions/face-icon-small-mad.gif[/IMG][IMG]i/expressions/face-icon-small-mad.gif[/IMG] :)

ok i found out the owner of that swapped Si is HASports.

It is the newest civic hatch and has been swapped to a K20A2 200 hp type S motor.

again, this car only ran 15.4 on slicks, disappointing to say the least.

http://www.roadrunnersauto.com/rick/sco/newsi.jpg

and then repainted only a few days later

http://www.roadrunnersauto.com/rick/.../hasportsi.jpg

motor pics soon to come

IB just picked up the crossmember yesterday and are back to work on the swap. Like I posted earlier, they are looking at a completion date in about 2-3 weeks.

It too 6 weeks here for the guy to get his Turbo kit made for his civic.. $27g's and 6 weeks..

uhhhh......he better be running like 50 lbs of boost for that price.

27g's? y didn't he get a supra in the first place?

Isn't that guy runnin like 11 psi on a rebuilt engine and only dynoing at 193hp? I think I read that in one of Mohawk's previous posts. If that's true, then I feel sorry for that guy. For the amount of money that he spend on that setup, he could have dropped in a rebuilt K20A2, run 15lbs of boost and get a sh!tload more hp than he is getting outta his turbo d17. When I read that, I decided to never spend a single penny trying to turbo my 2k1.

Con't here

http://www.7thgencivic.com/forum/mes...threadid=41636