Morimito H1 HID RETROFIT 19 Attachment(s) hello boys n girls. i just finished it....so ill share it. there are some other DIY on here so there is no need to make another one. it is literally a plug and play projector this retrofit took me about 2hrs (from baking it open to sealing it shut)....yes thats right TWO HOURS total for both headlights. Attachment 103313 Attachment 103314 http://img.photobucket.com/albums/v2...s/IMG_7909.jpg rear of the projector when everything is plugged in. Attachment 103315 i used an E46 shroud instead of the one provided. i like the E46 look better. Attachment 103316 Attachment 103317 Attachment 103318 Attachment 103319 Attachment 103320 suran wrapped it so dust wont get it while i cleaned the housing Attachment 103321 http://img.photobucket.com/albums/v2...s/IMG_7917.jpg reheat it in the oven and put the lens back in. take it up shut n leave it for 24hrs Attachment 103322 Attachment 103323 new retrofit on the left, old temporary retrofit on the right Attachment 103324 Attachment 103325 on the car. sorry it was raining outside Attachment 103326 Attachment 103327 left: Attachment 103328 right: Attachment 103329 top view Attachment 103330 Attachment 103331 all good/bad comments are welcome. this is my...um... 14th retrofit i believe...and by far the easiest! |
Re: Morimito H1 HID RETROFIT my thoughts bout these projector: if you are an experience retrofitter and have experienced a variety of projectors like the: TSX, TL, e46, FX, LS, IS or s2k projectors (ive done retros on all these), then you will be disappointed with these. especially if you are aiming for the BRIGHTEST output possible. the output is decent. if on a scale, TL projectors would score a 9. stock headlights would score a 4. the morimito H1 will score a 7. ok, let me set something straight. these morimito projectors are WAYYYYYYYYYYY better than stock halogen or HIDs in stock reflector. WAYY BETTER. NO COMPARISON. PERIOD. with that said, what good are these projectors? 1. they are SUPER AND HELLA easy to install. and for a beginner, that new retrofiter, that should be the selling point. cannot go wrong. 2. you dont have to calibrate strightness of the cut off lines. everything is pre-done. ur retrofit cut off line will look as good or almost as good at stock. they're not crooked. 3. damnnnn good output compared to stock. more than you'll every need (people like me excluded who have experienced such projectors like the TL or s2k...but those are 2x-3x more expensive.) 4. cheap (price wise). they are 120+shipping. shipping was like 8 dollars and they came within 3 days. good shipping time. http://www.theretrofitsource.com/pro...b0c35ca45495f5 5. fast turn around time. i finished in 2hrs. i understand most people arnt experienced as i am, but i could imagine these taking no longer than 4-6hrs to finish from start to finish. 6. bi-xenon. yes they are. the highbeam is one of the best ive seen. good amount of light throw. 7. very very small foam factor. they are also super light so the stock reflector will hold them easily. personal conclusion: this is my .02 remember. the output isnt good enough for me. i have these on 4300k morimito H1 bulbs with a 50w ballast. not bright enough. am i a lil crazy? yes. im ultra anal about my headlights. :screwy: i will be doing another retro will probably a TL projectors. overall, i give this projector a 8/10. (remember its overall with all factors taking into consideration) |
Re: Morimito H1 HID RETROFIT 5 Attachment(s) and for the hell of it, here are some of my other retros first retro on my civic. tsx in egay headlights Attachment 103308 Attachment 103309 G35 HID reflector in some housing for fun + wanna be audi eye lids (when this fad was in) Attachment 103310 girlfriends accord TSX retro: Attachment 103311 Attachment 103312 |
Re: Morimito H1 HID RETROFIT i want to get these for my 2004 will i run into any problems because my headlights use a 9006 socket ???. |
Re: Morimito H1 HID RETROFIT TRS now has adapter plates for 9006 as well. so you should be fine. the mini h1 projector is very decent, way better than lower grade oems like bosch, valeo, hella, etc. the only projectors that are a bit brighter would be the top dogs like s2k, TL, sc430. but i guess it depends on the person. my dim valeos which are barely brighter than halogen are plenty bright for me. i had 50w e46 and it was just insane to drive with. too much light. |
Re: Morimito H1 HID RETROFIT sweet 9006 plates im definitely getting them now. im just sick of having hids in my stock headlights. |
Re: Morimito H1 HID RETROFIT
Originally Posted by lowlife9
(Post 4508316)
sweet 9006 plates im definitely getting them now. im just sick of having hids in my stock headlights. foreground light is crap n not even. i know, i had hids in stock too......once. |
Re: Morimito H1 HID RETROFIT
Originally Posted by sl33pyriceboi ...there are some other DIY on here so there is no need to make another one. |
Re: Morimito H1 HID RETROFIT
Originally Posted by mkymonkey
(Post 4523840)
where? I cant find em :/ |
Re: Morimito H1 HID RETROFIT thanks! |
Re: Morimito H1 HID RETROFIT This looks really nice! btw, are those the e46-r or e46-r extended shrouds and did you have to do any trimming to get the shrouds to fit? |
Re: Morimito H1 HID RETROFIT selling any of these?? |
Re: Morimito H1 HID RETROFIT ^Wt do you mean? |
Re: Morimito H1 HID RETROFIT If ur selling any oF Ur retrofits? |
Re: Morimito H1 HID RETROFIT lol, I like the "Dont Touch" sign |
Re: Morimito H1 HID RETROFIT sorry not selling. maybe in a few months or so. maybe. lol |
All times are GMT -5. The time now is 01:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands