Reinstalling rebuilt D15B8 - need help id'ing brackets & stays
 

Working on son's 94 CX hatchback. Disassembled 6 months ago - he lost his job, got a new one, worked nights, yada yada. Now we've got it all back together, and some of the brackets/stays are unfamiliar, we're uncertain where they go (I know, I know - should have documented/taken pictures - live and learn!)

Is there an expert out there who can identify the parts in the attached picture, and point us to where to put them?

(Also, can't seem to find one that fits as the intake manifold stay that goes between the block and the manifold - I know we haven't lost anything...)


Thanks,
Scott & Robert

Re: Reinstalling rebuilt D15B8 - need help id'ing brackets & stays
 

https://www.civicforums.com/forums/a...p;d=1430662079

Far left looks like the flimsy bracket that supports the exhaust pipe under the engine, attaches below approximately where the oil filter is?


Got pics of different angles or different views of the others?

Middle bracket looks like it should hold up something in the middle, like a wire harness?


Far right bracket looks like it may be #12 in the parts diagram

http://www.hondaautomotiveparts.com/...SR33E1400D.gif



Been a long time since I looked deep into one this old.

Re: Reinstalling rebuilt D15B8 - need help id'ing brackets & stays
 

Thanks so much! You nailed it. Middle bracket also connects to exhaust header; it attaches to block at the same place as the flimsy bracket.

Found the intake stay in the engine compartment, still attached to the wiring harnesses.